Choose Product
Identify Problem
03
Find Solutions

Samsung Refrigerator dispenser leaking water

If your Samsung refrigerator dispenser is leaking water, start with the most likely causes and work down the list. A damaged dispenser door or its linkage often lets water weep or drip when the actuator or solenoid tries to open the ice chute, so inspect the dispenser door and frame for cracks or broken pivots first. Next check the house water pressure at the kitchen faucet since low pressure can make the water inlet act erratically and cause leaks. After that look at the dispenser actuator and its switches; a stuck or broken actuator can fail to seat the door or valve properly. Less commonly the water inlet valve itself will be worn or have bad solenoids, and you can test the valve for continuity with a multimeter. If a dispenser switch fails it can also let the valve stay energized and leak. For the exact replacement parts for your model, enter your refrigerator model number at RepairClinic.com to pull up the correct inlet valves, actuators, doors and switches.

01 - Samsung Refrigerator Dispenser Door

The dispenser door is opened by a motor or a solenoid to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Low Water Pressure from House Supply

The water inlet valve, which supplies water to the refrigerator water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the dispenser will leak. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common

03 - Samsung Refrigerator Dispenser Actuator

The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Common

04 - Samsung Refrigerator Water Inlet Valve

A refrigerator water inlet valve will direct water to the dispenser as well as the ice maker fill tube. If the inlet valve is obstructed, the solenoid coils on the valve are defective, or the home's water pressure is too low, the water valve will not work properly. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to test the water inlet valve for continuity. If the water inlet valve does not have continuity, replace it.
Less Common

05 - Samsung Refrigerator Dispenser Switch

The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Less Common

Frequently Asked Questions

My fridge water dispenser is leaking. What are the most likely causes?
How do I test the refrigerator water inlet valve?
How can I tell if the dispenser actuator or dispenser switch is bad?
Why is water dripping from the dispenser even when I am not pressing it?
How do I find my model number and order the correct replacement part on RepairClinic.com?

Shop by Samsung Refrigerator Parts