Choose Product
Identify Problem
03
Find Solutions

Goldstar Refrigerator dispenser leaking water

If your Goldstar refrigerator dispenser is leaking water, the most likely culprit is a damaged or misaligned dispenser door that fails to close properly; remove the dispenser control panel or frame to inspect the door for cracks or broken mounts first. Next check house water pressure, since low pressure or fluctuations can make the dispenser leak or drip; the inlet valve needs at least 20 psi to operate correctly. If the door and supply pressure look fine, inspect the dispenser actuator and the dispenser switches, which can fail to activate or stop the valve and cause dripping. Also test the refrigerator water inlet valve and its solenoid coils for obstruction or loss of continuity with a multimeter, since a faulty valve is a common cause of a fridge water dispenser dripping. Always shut off power and water before working on the dispenser, and replace any part that fails visual or electrical tests. Enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator and the specific dispenser components you need.

01 - Goldstar Refrigerator Dispenser Door

The dispenser door is opened by a motor or a solenoid to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Low Water Pressure from House Supply

The water inlet valve, which supplies water to the refrigerator water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the dispenser will leak. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common

03 - Goldstar Refrigerator Dispenser Actuator

The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Common

04 - Goldstar Refrigerator Water Inlet Valve

A refrigerator water inlet valve will direct water to the dispenser as well as the ice maker fill tube. If the inlet valve is obstructed, the solenoid coils on the valve are defective, or the home's water pressure is too low, the water valve will not work properly. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to test the water inlet valve for continuity. If the water inlet valve does not have continuity, replace it.
Less Common

05 - Goldstar Refrigerator Dispenser Switch

The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Less Common

Frequently Asked Questions

Refrigerator dispenser leaking water — what causes it?
Fridge water dispenser not working — where should I start?
Ice dispenser not working — could the dispenser door be the problem?
How do I test the refrigerator water inlet valve for problems?
How do I find the right replacement part on RepairClinic.com?