Choose Product
Identify Problem
03
Find Solutions

Crosley Refrigerator dispenser leaking water

If your refrigerator dispenser is leaking water, start by inspecting the dispenser door and its motor or solenoid—broken or misaligned doors often fail to close and let water drip out. Next check house water pressure; low supply pressure is a common cause and can make the fridge water dispenser leak, so test the kitchen faucet flow and confirm at least 20 psi at the inlet valve. If pressure is OK, look at the dispenser actuator and switches that send voltage to the dispenser; a damaged actuator or a bad dispenser switch can leave the valve partially open. Finally test the refrigerator water inlet valve for obstruction or failed solenoid coils using a multimeter for continuity and replace the valve if it does not meet specs. These checks cover the most likely fixes for a fridge leaking water from the dispenser and give you the diagnostic steps to proceed with confidence. Enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator and the step-by-step parts you’ll need.

01 - Crosley Refrigerator Dispenser Door

The dispenser door is opened by a motor or a solenoid to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Low Water Pressure from House Supply

The water inlet valve, which supplies water to the refrigerator water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the dispenser will leak. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common

03 - Crosley Refrigerator Dispenser Actuator

The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Common

04 - Crosley Refrigerator Water Inlet Valve

A refrigerator water inlet valve will direct water to the dispenser as well as the ice maker fill tube. If the inlet valve is obstructed, the solenoid coils on the valve are defective, or the home's water pressure is too low, the water valve will not work properly. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to test the water inlet valve for continuity. If the water inlet valve does not have continuity, replace it.
Less Common

05 - Crosley Refrigerator Dispenser Switch

The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Less Common

Frequently Asked Questions

Why is my refrigerator dispenser leaking water?
How do I test the refrigerator water inlet valve with a multimeter?
How can I tell if the dispenser actuator or dispenser switch is bad?
Is low water pressure causing my fridge water dispenser to leak or run slowly?
How do I enter my model number or part number on RepairClinic.com to find the right replacement part?

Shop by Crosley Refrigerator Parts