Choose Product
Identify Problem
03
Find Solutions

U-Line Refrigerator dispenser leaking water

If your U-Line refrigerator dispenser is leaking water, start by checking the dispenser door for damage or a stuck linkage—most leaks happen when the door does not close or seal properly and lets water escape. If the door looks fine, check the house water pressure next; the inlet valve needs sufficient pressure to seat properly and will leak or overflow if your supply is weak—test the kitchen faucet and confirm at least 20 psi to be sure. A damaged dispenser actuator that fails to engage or release the switch is the next likely culprit, so inspect the actuator and replace it if it is cracked or worn. The water inlet valve itself can be obstructed or have bad solenoid coils; use a multimeter to test the valve for continuity and replace it if it fails. Finally, a defective dispenser switch can prevent correct operation, so test each switch with a meter and swap any that lack continuity. If you need parts, enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator.

01 - U-Line Refrigerator Dispenser Door

The dispenser door is opened by a motor or a solenoid to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Low Water Pressure from House Supply

The water inlet valve, which supplies water to the refrigerator water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the dispenser will leak. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common

03 - U-Line Refrigerator Dispenser Actuator

The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Common

04 - U-Line Refrigerator Water Inlet Valve

A refrigerator water inlet valve will direct water to the dispenser as well as the ice maker fill tube. If the inlet valve is obstructed, the solenoid coils on the valve are defective, or the home's water pressure is too low, the water valve will not work properly. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to test the water inlet valve for continuity. If the water inlet valve does not have continuity, replace it.
Less Common

05 - U-Line Refrigerator Dispenser Switch

The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Less Common

Frequently Asked Questions

Why is my refrigerator dispenser leaking water?
How do I test the water inlet valve on my refrigerator?
My ice maker works but the water dispenser leaks. What should I check?
How do I access and check the dispenser actuator or switch?
How can I enter my model or part number on RepairClinic.com to find the right replacement part?