Choose Product
Identify Problem
03
Find Solutions

Gaggenau Refrigerator dispenser leaking water

If your refrigerator dispenser is leaking water, start by checking the dispenser door — a broken or misaligned dispenser door often fails to close and is the most likely cause of water dripping from the dispenser. If the door looks fine, confirm house water pressure at a nearby faucet; low water pressure can cause the dispenser to leak even when internal parts are working. Next suspect the dispenser actuator, which must properly engage the switch to stop water flow; a damaged actuator can leave the valve open. Less commonly, the water inlet valve may be obstructed or have bad solenoid coils, or the valve may not be getting the 20 psi it needs to seat properly, so test the valve for continuity with a multimeter and inspect for debris. Finally, faulty dispenser switches can fail to cut power to the valve, so test those for continuity as well. If you need replacement parts, enter your model number on RepairClinic.com to find the exact part that fits your refrigerator.

01 - Gaggenau Refrigerator Dispenser Door

The dispenser door is opened by a motor or a solenoid to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Low Water Pressure from House Supply

The water inlet valve, which supplies water to the refrigerator water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the dispenser will leak. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common

03 - Gaggenau Refrigerator Dispenser Actuator

The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Common

04 - Gaggenau Refrigerator Water Inlet Valve

A refrigerator water inlet valve will direct water to the dispenser as well as the ice maker fill tube. If the inlet valve is obstructed, the solenoid coils on the valve are defective, or the home's water pressure is too low, the water valve will not work properly. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to test the water inlet valve for continuity. If the water inlet valve does not have continuity, replace it.
Less Common

05 - Gaggenau Refrigerator Dispenser Switch

The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Less Common

Frequently Asked Questions

Why is my refrigerator water dispenser leaking?
Water keeps dripping from the dispenser even when I am not using it, what should I check?
How do I test the water inlet valve or dispenser switch?
The dispenser door will not open properly. Do I need to replace the door or the actuator?
How do I enter my model number or part number on RepairClinic.com to find the right replacement part?

Shop by Gaggenau Refrigerator Parts