Choose Product
Identify Problem
03
Find Solutions

Frigidaire Refrigerator dispenser leaking water

If your Frigidaire dispenser is leaking water, the most likely culprit is a damaged dispenser door or its mechanism that fails to close or seal properly. Start by inspecting the dispenser door and the frame behind the control panel; you may need to remove the dispenser control panel to check for broken hinges, warped chutes, or a stuck motor or solenoid. If the door looks fine, check the household water pressure next — low water pressure or a partially clogged line can cause the water dispenser to drip or leak. A damaged dispenser actuator that does not fully engage the switches is the next common cause, so examine the actuator for cracks or wear. Less often the issue is the water inlet valve, which needs about 20 psi to operate and should be tested for continuity with a multimeter, or a faulty dispenser switch that fails to stop flow. If you need a replacement, enter your model number on RepairClinic.com to find the exact part for your refrigerator and get step by step parts and repair guidance.

01 - Frigidaire Refrigerator Dispenser Door

The dispenser door is opened by a motor or a solenoid to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Low Water Pressure from House Supply

The water inlet valve, which supplies water to the refrigerator water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the dispenser will leak. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common

03 - Frigidaire Refrigerator Dispenser Actuator

The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Common

04 - Frigidaire Refrigerator Water Inlet Valve

A refrigerator water inlet valve will direct water to the dispenser as well as the ice maker fill tube. If the inlet valve is obstructed, the solenoid coils on the valve are defective, or the home's water pressure is too low, the water valve will not work properly. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to test the water inlet valve for continuity. If the water inlet valve does not have continuity, replace it.
Less Common

05 - Frigidaire Refrigerator Dispenser Switch

The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Less Common

Frequently Asked Questions

Why is my refrigerator dispenser leaking water?
Could low water pressure cause my fridge water dispenser not working or leaking?
How do I test the refrigerator water inlet valve when the dispenser is leaking?
How can I tell if the dispenser actuator or dispenser switch is the problem?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?

Shop by Frigidaire Refrigerator Parts