A leaking refrigerator dispenser is usually caused by a damaged dispenser door that will not seal or open properly, so start by inspecting the dispenser door and frame for cracks or broken linkage. If the door looks fine, the next most likely problems are low house water pressure or a faulty dispenser actuator that fails to trigger the switch. Check the kitchen faucet flow to judge water pressure and remember the inlet valve generally needs about 20 psi to operate correctly. Less commonly the water inlet valve itself or a defective dispenser switch can be the source, so test the inlet valve for continuity with a multimeter and replace it if it fails, and check each dispenser switch for continuity as well. These checks will pinpoint whether you need a new dispenser door, actuator, water inlet valve, or switch. If you need parts, enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator and get step-by-step repair guidance.
01 - Inglis Refrigerator Dispenser Door
The dispenser door is opened by a motor or a solenoid to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Enter model number to search for the required part specific to your product
The water inlet valve, which supplies water to the refrigerator water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the dispenser will leak. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common
03 - Inglis Refrigerator Dispenser Actuator
The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
A refrigerator water inlet valve will direct water to the dispenser as well as the ice maker fill tube. If the inlet valve is obstructed, the solenoid coils on the valve are defective, or the home's water pressure is too low, the water valve will not work properly. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to test the water inlet valve for continuity. If the water inlet valve does not have continuity, replace it.
The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.