Choose Product
Identify Problem
03
Find Solutions

Ikea Refrigerator dispenser leaking water

When your Ikea refrigerator dispenser is leaking water into the drip tray or onto the floor, start by checking the dispenser door, because a broken or misaligned dispenser door or hinge can fail to close and let water escape. If the door looks fine, verify house water pressure at the kitchen faucet; low water pressure can make the water inlet valve act up and is a common cause of a water dispenser leaking, and the valve needs about 20 psi to operate correctly. Next inspect the dispenser actuator, since a damaged actuator may not engage the switch. If the actuator and pressure check clear, test the refrigerator water inlet valve with a multimeter and replace it if the solenoid coils lack continuity. Finally test the dispenser switches for continuity and replace any switch that does not pass the test. Remove the dispenser control trim carefully to access parts, keep the area dry, and enter your model number on RepairClinic.com to find the exact replacement part for your fridge.

01 - Ikea Refrigerator Dispenser Door

The dispenser door is opened by a motor or a solenoid to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Low Water Pressure from House Supply

The water inlet valve, which supplies water to the refrigerator water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the dispenser will leak. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common

03 - Ikea Refrigerator Dispenser Actuator

The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Common

04 - Ikea Refrigerator Water Inlet Valve

A refrigerator water inlet valve will direct water to the dispenser as well as the ice maker fill tube. If the inlet valve is obstructed, the solenoid coils on the valve are defective, or the home's water pressure is too low, the water valve will not work properly. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to test the water inlet valve for continuity. If the water inlet valve does not have continuity, replace it.
Less Common

05 - Ikea Refrigerator Dispenser Switch

The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Less Common

Frequently Asked Questions

Why is my refrigerator water dispenser leaking onto the floor?
Could low house water pressure make my fridge dispenser leak or drip?
How do I test the water inlet valve and dispenser switches?
Can a broken dispenser door or actuator cause the dispenser to leak or fail to dispense ice?
How do I find the correct replacement part on RepairClinic.com using my model number or part number?

Shop by Ikea Refrigerator Parts