Choose Product
Identify Problem
03
Find Solutions

Maytag Refrigerator dispenser leaking water

If your Maytag refrigerator water dispenser is leaking or dripping, start by checking the dispenser door and chute for damage or something blocking the release; a broken dispenser door is the most common cause and can let water run when it should be closed. Next check your home water pressure at the kitchen faucet; low pressure or a weak inlet feed often causes a fridge water dispenser leaking issue because the inlet valve or its solenoids need at least about 20 psi to seat properly. If the door and pressure look fine, inspect the dispenser actuator and dispenser switch for wear or broken tabs that fail to activate or shut off the valve. Finally test the refrigerator water inlet valve with a multimeter for continuity and replace it if the solenoids are open. You can find replacement parts for your exact model at RepairClinic.com by entering your refrigerator model number to pull up the matching valves, actuators, switches, and dispenser doors you need for repair.

01 - Maytag Refrigerator Dispenser Door

The dispenser door is opened by a motor or a solenoid to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Low Water Pressure from House Supply

The water inlet valve, which supplies water to the refrigerator water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the dispenser will leak. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common

03 - Maytag Refrigerator Dispenser Actuator

The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Common

04 - Maytag Refrigerator Water Inlet Valve

A refrigerator water inlet valve will direct water to the dispenser as well as the ice maker fill tube. If the inlet valve is obstructed, the solenoid coils on the valve are defective, or the home's water pressure is too low, the water valve will not work properly. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to test the water inlet valve for continuity. If the water inlet valve does not have continuity, replace it.
Less Common

05 - Maytag Refrigerator Dispenser Switch

The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Less Common

Frequently Asked Questions

Why is my refrigerator dispenser leaking water?
Can low water pressure make my fridge water dispenser leak?
How can I tell if the dispenser actuator, switch, or motor is bad?
If the water inlet valve is bad, will the ice maker also be affected?
How do I find the right replacement part on RepairClinic.com using my model number or part number?

Shop by Maytag Refrigerator Parts