If your Caloric refrigerator dispenser is leaking water, the most likely cause is a damaged dispenser door that is not seating or opening properly so water or melted ice escapes. Next check the house water pressure since low pressure can cause valves to drip; test the kitchen faucet flow to see if supply is weak. A worn dispenser actuator that fails to engage the switch is another common culprit, followed by a faulty water inlet valve that needs at least 20 psi and should be checked for continuity with a multimeter. Less commonly, a bad dispenser switch can fail to stop water flow. Start by inspecting the dispenser door and surrounding trim, verify household water pressure, and test the inlet valve and switches if you have a multimeter. If you need replacement parts for a fridge water dispenser dripping or other refrigerator dispenser leaking water issues, enter your model number at RepairClinic.com to find the exact parts that fit your refrigerator and get step by step parts guidance.
01 - Caloric Refrigerator Dispenser Door
The dispenser door is opened by a motor or a solenoid to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Enter model number to search for the required part specific to your product
The water inlet valve, which supplies water to the refrigerator water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the dispenser will leak. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common
03 - Caloric Refrigerator Dispenser Actuator
The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
A refrigerator water inlet valve will direct water to the dispenser as well as the ice maker fill tube. If the inlet valve is obstructed, the solenoid coils on the valve are defective, or the home's water pressure is too low, the water valve will not work properly. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to test the water inlet valve for continuity. If the water inlet valve does not have continuity, replace it.
The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.