Choose Product
Identify Problem
03
Find Solutions

Kelvinator Refrigerator dispenser leaking water

If your refrigerator dispenser is leaking water, the most likely culprits are a damaged dispenser door that will not close properly, low house water pressure affecting the inlet valve, or a faulty dispenser actuator that fails to operate the door or switch. Start by inspecting the dispenser door and frame for visible damage and remove the control panel if you need access. Check the kitchen faucet flow to verify the home water pressure; the inlet valve needs around 20 psi to work correctly. If pressure is adequate, test the water inlet valve and dispenser switches with a multimeter for continuity and look for clogged passages or bad solenoid coils. A defective dispenser switch or actuator is less common but will prevent proper valve operation and can cause leaks. Repair Clinic carries the parts you need, from dispenser doors and actuators to water inlet valves and switches, and you can enter your model number on RepairClinic.com to find the exact replacement part for your fridge; having the right part makes this repair straightforward for a confident DIYer or tech.

01 - Kelvinator Refrigerator Dispenser Door

The dispenser door is opened by a motor or a solenoid to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Low Water Pressure from House Supply

The water inlet valve, which supplies water to the refrigerator water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the dispenser will leak. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common

03 - Kelvinator Refrigerator Dispenser Actuator

The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Common

04 - Kelvinator Refrigerator Water Inlet Valve

A refrigerator water inlet valve will direct water to the dispenser as well as the ice maker fill tube. If the inlet valve is obstructed, the solenoid coils on the valve are defective, or the home's water pressure is too low, the water valve will not work properly. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to test the water inlet valve for continuity. If the water inlet valve does not have continuity, replace it.
Less Common

05 - Kelvinator Refrigerator Dispenser Switch

The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Less Common

Frequently Asked Questions

Why is my refrigerator water dispenser leaking?
Fridge water dispenser not working or not dispensing water, what should I check first?
How do I test the refrigerator water inlet valve?
How can I tell if the dispenser switch or actuator is bad?
How do I find and buy the correct replacement part on RepairClinic.com?

Shop by Kelvinator Refrigerator Parts