Choose Product
Identify Problem
03
Find Solutions

Hotpoint Refrigerator dispenser leaking water

If your refrigerator dispenser is leaking water, start by checking the dispenser door — a broken or misaligned door often fails to close and is the most likely cause of a fridge water dispenser leaking. Next rule out low household water pressure by running the kitchen faucet; the water inlet valve needs about 20 psi to seal properly and low pressure can cause leaks. If the door and supply pressure look fine, inspect the dispenser actuator and the dispenser switches that send voltage to the motor or solenoid, since a damaged actuator or a failed switch can leave the dispenser stuck open. Less commonly the water inlet valve itself is obstructed or has bad solenoid coils; use a multimeter to check the valve and switches for continuity before replacing them. If you need parts, enter your model number on RepairClinic.com to find the exact replacement dispenser door, actuator, inlet valve, or switches that fit your refrigerator.

01 - Hotpoint Refrigerator Dispenser Door

The dispenser door is opened by a motor or a solenoid to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Low Water Pressure from House Supply

The water inlet valve, which supplies water to the refrigerator water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the dispenser will leak. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common

03 - Hotpoint Refrigerator Dispenser Actuator

The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Common

04 - Hotpoint Refrigerator Water Inlet Valve

A refrigerator water inlet valve will direct water to the dispenser as well as the ice maker fill tube. If the inlet valve is obstructed, the solenoid coils on the valve are defective, or the home's water pressure is too low, the water valve will not work properly. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to test the water inlet valve for continuity. If the water inlet valve does not have continuity, replace it.
Less Common

05 - Hotpoint Refrigerator Dispenser Switch

The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Less Common

Frequently Asked Questions

Why is my refrigerator water dispenser leaking?
How do I test the refrigerator water inlet valve?
My dispenser drips after I press it. What should I check?
Can low water pressure cause the dispenser to leak or not work?
How do I enter my model number to find the correct replacement part on RepairClinic.com?

Shop by Hotpoint Refrigerator Parts