Choose Product
Identify Problem
03
Find Solutions

LG Ice Maker in Refrigerator Compartment Not Working

If the ice maker in your LG refrigerator compartment is not making ice or the dispenser won’t dispense, start with the water supply: a bad or under-pressured water inlet valve is the most common cause — the valve needs about 20 psi and must be getting power, so check water pressure and use a multimeter to verify voltage. Next likely causes are the dispenser solenoid or dispenser door motor; either can prevent the door flap from opening, so test each for continuity and make sure the actuator pin moves freely. A failed compartment fan motor can also stop ice production by letting temperatures rise, so listen for the fan and test it for continuity. Finally inspect the dispenser funnel guide and chute for obstructions or damage that will block ice. You can troubleshoot these parts with a multimeter and simple inspections, and when you’re ready to replace a component enter your refrigerator model number on RepairClinic.com to find the exact replacement parts for your unit.

01 - LG Refrigerator Water Inlet Valve

The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won’t fill with water to make ice, replace th...e water inlet valve.
Enter model number to search for the required part specific to your product
Common

02 - LG Refrigerator Dispenser Solenoid

The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
Common

03 - LG Refrigerator Fan Motor

The refrigerator ice maker compartment fan motor assists in keeping the air temperature in the compartment cold enough for the ice maker to make ice. If the fan motor has failed and isn't running, the temperature will rise high enough that the ice maker will be unable to make ice. The fan motor can be inspected to see if it's running when the ice maker should be working. The component can also be tested for electrical continuity to help determine if it's faulty. A faulty fan motor will need to be replaced.
Common

04 - LG Refrigerator Dispenser Door Motor

The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
Common

05 - LG Refrigerator Motor

The refrigerator ice maker compartment fan motor assists in keeping the air temperature in the compartment cold enough for the ice maker to make ice. If the fan motor has failed and isn't running, the temperature will rise high enough that the ice maker will be unable to make ice. The fan motor can be inspected to see if it's running when the ice maker should be working. The component can also be tested for electrical continuity to help determine if it's faulty. A faulty fan motor will need to be replaced.
Common

06 - LG Refrigerator Dispenser Funnel Guide

The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
Common

Frequently Asked Questions

Ice maker not making ice — what should I check first?
Ice dispenser not working — ice won’t come out even though the ice maker is making ice
Refrigerator ice maker not making ice — could a fan motor be the problem?
How do I test parts with a multimeter when my refrigerator ice maker is not working?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?

Shop by LG Refrigerator Parts