Americana Ice Maker in Refrigerator Compartment Not Working
If your Americana refrigerator ice maker in the refrigerator compartment is not making ice, the most likely culprits are a faulty water inlet valve or insufficient water pressure, a stuck or bad dispenser solenoid or dispenser door motor that won’t open the ice chute, a failed compartment fan motor that lets the ice area warm up, or a clogged or damaged funnel guide blocking ice flow. Start with the inlet valve since it needs at least 20 psi and power to fill the mold; if pressure is okay but the valve has power and the ice maker still won’t fill, replace the valve. Next check the dispenser solenoid and door motor for continuity and free movement of the actuator pin so the ice dispenser will open. Verify the ice maker compartment fan is running when it should and test it for continuity if not. Finally inspect the funnel guide for jams or broken pieces. If you need parts, enter your model number on RepairClinic.com to find the exact replacement for your refrigerator.
01 - Americana Refrigerator Water Inlet Valve
The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won’t fill with water to make ice, replace th...e water inlet valve.
Enter model number to search for the required part specific to your product
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
The refrigerator ice maker compartment fan motor assists in keeping the air temperature in the compartment cold enough for the ice maker to make ice. If the fan motor has failed and isn't running, the temperature will rise high enough that the ice maker will be unable to make ice. The fan motor can be inspected to see if it's running when the ice maker should be working. The component can also be tested for electrical continuity to help determine if it's faulty. A faulty fan motor will need to be replaced.
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
The refrigerator ice maker compartment fan motor assists in keeping the air temperature in the compartment cold enough for the ice maker to make ice. If the fan motor has failed and isn't running, the temperature will rise high enough that the ice maker will be unable to make ice. The fan motor can be inspected to see if it's running when the ice maker should be working. The component can also be tested for electrical continuity to help determine if it's faulty. A faulty fan motor will need to be replaced.
06 - Americana Refrigerator Dispenser Funnel Guide
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.