Electrolux Ice Maker in refrigerator compartment frosting up
If your Electrolux ice maker in the refrigerator compartment is frosting up and the ice maker is not making ice, start with the door gasket — a twisted or torn gasket is the most likely cause because it lets warm, moist air into the compartment and creates frost. If the gasket looks good, check the dispenser components next: a failed dispenser solenoid or dispenser door motor can leave the dispenser door closed or stuck, letting cold air escape and moisture condense on the ice maker. Inspect the actuator pin, test the solenoid and motor for continuity with a multimeter, and look for a broken or obstructed funnel guide or damaged dispenser door that could block normal operation. Less commonly, the dispenser door can be held open by an item or debris, which also causes frosting. For straightforward ice maker repair, replace torn gaskets, faulty solenoids or motors, or damaged dispenser parts as needed. Enter your model number on RepairClinic.com to find the exact replacement part that fits your refrigerator and get the parts and instructions you need to finish the repair.
01 - Electrolux Refrigerator Door Gasket
A door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, which can result in frost building up on the ice maker compartment. Inspect the door gasket for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
The dispenser door is opened by a motor, solenoid or actuator arm to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
If the dispenser door is stuck open, warm air can enter the ice maker compartment causing frost buildup and potentially stopping the ice maker. Remove any items that may be keeping the dispenser door from closing.
Less Common
Frequently Asked Questions
Why is the ice maker frosting up in the refrigerator compartment?
Ice maker not making ice — can frost or the dispenser door cause that?
Ice dispenser not working — why won't the dispenser door open?
Freezer is cold but the fridge is warm — could a bad gasket cause frost on the ice maker?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?