Admiral Ice Maker in refrigerator compartment frosting up
If your Admiral ice maker is frosting up inside the refrigerator compartment, start by checking the door gasket first — a twisted, torn, or compressed gasket is the most likely cause because it lets warm, humid air into the compartment and creates frost. Next look at the ice dispenser components: a bad dispenser solenoid or a failed dispenser door motor can leave the dispenser stuck in the wrong position or not cycling properly, which can change airflow and lead to frost or a unit that won’t dispense. Inspect the dispenser funnel guide and the dispenser door for obstructions or damage that could block normal operation, and make sure the dispenser door itself is not stuck open, which is a less common but easy-to-miss cause of frost. You can use a multimeter to test solenoids and motors for continuity and manually check actuator pins and linkages for free movement. Enter your model number on RepairClinic.com to find the exact replacement gasket, solenoid, motor, or dispenser parts for your refrigerator.
01 - Admiral Refrigerator Door Gasket
A door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, which can result in frost building up on the ice maker compartment. Inspect the door gasket for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
The dispenser door is opened by a motor, solenoid or actuator arm to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
If the dispenser door is stuck open, warm air can enter the ice maker compartment causing frost buildup and potentially stopping the ice maker. Remove any items that may be keeping the dispenser door from closing.
Less Common
Frequently Asked Questions
Why is the ice maker in the refrigerator compartment frosting up?
My fridge won't dispense ice — what parts should I check first?
How do I test a dispenser door solenoid or motor with a multimeter?
Can a bad door gasket cause my refrigerator to run constantly or build up frost?
How do I find the correct replacement part for my Admiral refrigerator on RepairClinic?