Jenn Air Ice Maker in refrigerator compartment frosting up
If the ice maker in your refrigerator compartment is frosting up, warm air is getting into that area and condensing into frost. The most likely cause is a bad door gasket that is twisted, torn, or not seating properly, so start by inspecting the fridge door seal for gaps or damage since a refrigerator door not closing or a fridge door not sealing will let moist air in. Next check the dispenser assembly: a bad dispenser solenoid or a failed dispenser door motor can prevent the flap from operating and let warm air into the ice area, so test the solenoid and motor for power and continuity and make sure the actuator pin moves freely. Also inspect the funnel guide and the dispenser door for obstructions or breaks, and remove anything keeping the dispenser door from staying closed. If you need replacement parts, enter your model number on RepairClinic.com to find the exact part that fits your Jenn Air refrigerator.
01 - Jenn Air Refrigerator Door Gasket
A door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, which can result in frost building up on the ice maker compartment. Inspect the door gasket for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
The dispenser door is opened by a motor, solenoid or actuator arm to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
If the dispenser door is stuck open, warm air can enter the ice maker compartment causing frost buildup and potentially stopping the ice maker. Remove any items that may be keeping the dispenser door from closing.
Less Common
Frequently Asked Questions
My ice maker stopped making ice and the compartment is frosting up. What could cause that?
How can I tell if the refrigerator door gasket is causing frost buildup?
How do I test the dispenser solenoid or dispenser door motor?
What should I do if the dispenser door is stuck open or ice is jammed in the funnel guide?
How do I find and order the right replacement part on RepairClinic.com?