Roper Ice Maker in refrigerator compartment frosting up
If the ice maker compartment in your refrigerator is frosting up, warm air is getting in where it should not. The most likely culprit is a damaged or twisted door gasket that no longer seals the frame, so start by inspecting and replacing a torn gasket. If the gasket checks out, the dispenser components are the next suspects in order of likelihood: a faulty dispenser solenoid or a bad dispenser door motor can leave the dispenser flap closed or intermittently open, letting humid air condense and freeze around the ice maker. Next check the dispenser funnel guide and the dispenser door itself for obstructions or damage that stop the door from operating smoothly, and look for any items holding the dispenser door open. You can test the solenoid and motor for continuity with a multimeter and replace parts that fail. If you need parts, enter your model number on RepairClinic.com to find the exact replacement for your refrigerator ice maker or dispenser and get step-by-step guidance for the repair.
01 - Roper Refrigerator Door Gasket
A door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, which can result in frost building up on the ice maker compartment. Inspect the door gasket for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
The dispenser door is opened by a motor, solenoid or actuator arm to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
If the dispenser door is stuck open, warm air can enter the ice maker compartment causing frost buildup and potentially stopping the ice maker. Remove any items that may be keeping the dispenser door from closing.
Less Common
Frequently Asked Questions
Ice maker not making ice: Why is my ice maker frosting up and stopping?
Ice dispenser not working: My ice dispenser won’t dispense — could the dispenser solenoid or motor be bad?
Fridge not cooling but freezer works: Could a bad door gasket or dispenser door cause frost and a warm refrigerator?
Refrigerator door not closing properly: How do I check the gasket and dispenser door for problems?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?