Goldstar Ice Maker in refrigerator compartment frosting up
If your ice maker compartment is frosting up, start with the door gasket: a twisted, torn or loose gasket is the most likely cause because it lets warm, moist air into the refrigerator and creates frost around the ice maker. If the gasket looks good, check the dispenser components next — a bad dispenser solenoid or a failing dispenser door motor can prevent the dispenser door from operating properly and let cold air escape or trap moisture, which can freeze up the ice maker and leave your refrigerator ice maker not working or the ice maker not making ice. Also inspect the funnel guide and the dispenser door for obstructions or damage, and make sure the dispenser door is not stuck open. These parts often show visible wear or can be tested with a multimeter to confirm a fault. If you need replacement parts, enter your refrigerator model number on RepairClinic.com to see the exact parts that fit your machine and get back to fixing it quickly.
01 - Goldstar Refrigerator Door Gasket
A door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, which can result in frost building up on the ice maker compartment. Inspect the door gasket for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
The dispenser door is opened by a motor, solenoid or actuator arm to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
If the dispenser door is stuck open, warm air can enter the ice maker compartment causing frost buildup and potentially stopping the ice maker. Remove any items that may be keeping the dispenser door from closing.
Less Common
Frequently Asked Questions
Why is my refrigerator ice maker compartment frosting up?
Ice dispenser not dispensing ice — what parts should I check?
How do I test the dispenser solenoid or door motor?
Can a damaged door gasket cause the ice maker to stop working?
How do I enter my model number on RepairClinic.com to find the right replacement part?