E-Wave Ice Maker in refrigerator compartment frosting up
If the ice maker in your refrigerator compartment is frosting up, start with the door gasket — a twisted, torn or loose gasket is the most likely culprit because it lets warm, moist air into the compartment and causes frost buildup. After the gasket, check the dispenser assembly: a defective dispenser solenoid or a failed dispenser door motor can prevent the flap from opening or closing properly, and a stuck or broken dispenser door or an obstructed funnel guide can leave the dispenser ajar so warm air gets in. Frost can eventually stop the ice maker from making ice and clog the dispenser mechanisms. Inspect the gasket and dispenser door for visible damage, clear any obstructions, and use a multimeter to test the solenoid and motor for continuity before replacing parts. If you need parts for ice maker repair or the ice maker not making ice, enter your model number on RepairClinic.com to find the exact replacement part for your specific refrigerator.
01 - E-Wave Refrigerator Door Gasket
A door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, which can result in frost building up on the ice maker compartment. Inspect the door gasket for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
The dispenser door is opened by a motor, solenoid or actuator arm to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
If the dispenser door is stuck open, warm air can enter the ice maker compartment causing frost buildup and potentially stopping the ice maker. Remove any items that may be keeping the dispenser door from closing.
Less Common
Frequently Asked Questions
Why is the ice maker in my refrigerator compartment frosting up?
My ice maker is not making ice and the compartment is frosted. Could the dispenser solenoid or door motor be the problem?
How do I fix a dispenser door that is stuck open and letting warm air in?
How can I tell if my refrigerator door gasket is the problem?
How do I find the right replacement part for my E-Wave refrigerator on RepairClinic.com?
Unlock the Right Part for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.