Dacor Ice Maker in refrigerator compartment frosting up
Frost forming on the ice maker inside the refrigerator compartment is usually caused by warm, humid air getting in. The most likely cause is a damaged or twisted door gasket, which means your fridge door not sealing properly and letting moisture condense and freeze around the ice maker. If the gasket checks out, inspect the dispenser assembly next: a bad dispenser solenoid is a common culprit, followed by a failed dispenser door motor, a broken funnel guide, or a damaged dispenser door that won’t open or close correctly. A dispenser door stuck open is less common but will also let warm air in and can stop the ice maker from making ice. Start by checking the gasket for gaps, then watch the dispenser door while operating it and test the solenoid or motor with a multimeter if you have one. These repairs are often straightforward, and you can enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator.
01 - Dacor Refrigerator Door Gasket
A door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, which can result in frost building up on the ice maker compartment. Inspect the door gasket for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
The dispenser door is opened by a motor, solenoid or actuator arm to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
If the dispenser door is stuck open, warm air can enter the ice maker compartment causing frost buildup and potentially stopping the ice maker. Remove any items that may be keeping the dispenser door from closing.
Less Common
Frequently Asked Questions
refrigerator ice maker not making ice
fridge not cooling but freezer works
refrigerator ice dispenser not working
refrigerator door not closing properly
how do i find my model number and buy the correct replacement part on RepairClinic.com