Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpGibson Refrigerator RepairGibson Ice Maker in refrigerator compartment frosting up Repair
Gibson Ice Maker in refrigerator compartment frosting up
If your Gibson ice maker compartment is frosting up inside the refrigerator, warm, moist air is getting in and condensing on the cold surfaces. The most likely cause is a damaged or twisted door gasket that is failing to seal, followed by a faulty dispenser solenoid or dispenser door motor that leaves the ice dispenser door from opening and closing properly. A clogged or broken funnel guide, a cracked dispenser door, or a door that’s mechanically stuck open can also let warm air into the ice maker area and cause frost buildup or make the refrigerator ice maker not working as expected. Start by inspecting the gasket for tears or gaps, then check the dispenser actuator and test the solenoid and motor for continuity and power; clear any obstruction in the funnel guide and make sure the dispenser door can move freely. If you need parts, enter your model number on RepairClinic.com to find the exact replacement parts for your Gibson so you can fix the ice dispenser or ice maker quickly and get the frost under control.
01 - Gibson Refrigerator Door Gasket
A door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, which can result in frost building up on the ice maker compartment. Inspect the door gasket for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
Highly Likely
02 - Gibson Refrigerator Dispenser Solenoid
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
Common
03 - Gibson Refrigerator Dispenser Door Motor
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
Common
04 - Gibson Refrigerator Dispenser Funnel Guide
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
Common
05 - Gibson Refrigerator Dispenser Door
The dispenser door is opened by a motor, solenoid or actuator arm to dispense the ice, but if the door is broken, it may not open properly in order to release the ice. You should inspect the dispenser door for damage to determine if the component should be replaced. You may have to remove the dispenser control panel or frame to access and inspect the dispenser door.
Common
06 - Dispenser door stuck open
If the dispenser door is stuck open, warm air can enter the ice maker compartment causing frost buildup and potentially stopping the ice maker. Remove any items that may be keeping the dispenser door from closing.
Less Common
Frequently Asked Questions
Ice maker not making ice — can frosting in the refrigerator compartment stop it?
Freezer working but fridge not cooling — could a bad door gasket or dispenser door be the reason?
Refrigerator door not closing — how do I check the door gasket and dispenser door?
Ice dispenser not working — should I test the dispenser solenoid or dispenser door motor?
How do I enter my model number or part number on RepairClinic.com to find the right replacement part?
Shop by Gibson Refrigerator Parts
Shop by Popular Gibson Refrigerator Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com