Choose Product
Identify Problem
03
Find Solutions

Goldstar Refrigerator not running

If your Goldstar refrigerator is dead or not running and the display is blank, start with the most likely causes: a failed dispenser control board or user control and display board. Inspect the boards for burn marks and test basic power first—make sure the plug is fully seated, the outlet is supplying power, and no circuit breaker or fuse has tripped (avoid using a GFCI for a fridge). Next, check the wire harness between the control panel and the board; loose or damaged connectors are a common, easy-to-fix cause when your refrigerator control panel is not working or the refrigerator display not working. A simple power reset by unplugging the fridge or switching the breaker off and on can restore operation after a surge, and only after you’ve ruled out those items should you consider replacing the main control board. If you need a replacement part, enter your model number on RepairClinic.com to find the exact control board, dispenser board, or harness that fits your refrigerator and get step-by-step guidance for the repair.

01 - Goldstar Refrigerator Dispenser Control Board

If the refrigerator display appears completely dead, it's possible the dispenser control board has failed. You should inspect the board for any burn marks and replace it if it appears damaged.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Incoming Power Problem

Ensure plug is tightly pushed into a regular electrical outlet and the outlet is supplying power. Using a ground fault outlet for a refrigerator is not recommended. Confirm that no circuit breakers have tripped or fuses have blown.
Highly Likely

03 - Goldstar Refrigerator User Control and Display Board

If the refrigerator display appears completely dead, it's possible the user control and display board has failed. You should inspect the board for any burn marks and replace it if it appears damaged.
Common

04 - Disconnected or Damaged Wire Harness

The wires from the control panel to the control board may be loose or have become disconnected. Make sure the wire harness connectors are tight. A damaged wire harness will need to be replaced.
Common

05 - Power reset

After a power surge or power outage, refrigerator operation could be temporarily affected. Full operation can sometimes be restored through a power reset by either unplugging the appliance's power cord for a few minutes and then plugging it back in or switching off the circuit breaker for the refrigerator then switching it back on.
Common

06 - Goldstar Refrigerator Control Board

If nothing is working on the refrigerator, it's likely the control board is defective. However, this is almost never the cause. Before replacing the main control board, test all of more commonly defective parts. If none of the other components are defective, consider replacing the control board.
Less Common

Frequently Asked Questions

Refrigerator control panel not working — what should I check first?
Fridge not cooling and the display is dead — could the control board be the cause?
How can I tell if the dispenser control board or the user control and display board is bad?
Unplugging the refrigerator fixed it temporarily — do I still need to replace anything?
How do I enter my model number on RepairClinic to find the right replacement part?