Choose Product
Identify Problem
03
Find Solutions

Ikea Refrigerator not running

If your Ikea refrigerator has stopped running and the display is completely dead, start with the most likely causes and work down the list. The dispenser control board failure is the top suspect if the display and dispenser functions are dead, so inspect the board for burn marks and corrosion. Next check incoming power: make sure the plug is fully seated, the outlet is live and no breakers or fuses have tripped, and avoid using a GFCI for a fridge. A failed user control and display board or a disconnected or damaged wire harness are common next steps to check; verify harness connectors are tight and look for chafed wiring. Sometimes a simple power reset—unplugging the fridge for a few minutes or switching the breaker off and on—restores operation after a surge. The main control board is less commonly the culprit, so test the other components first before replacing it. Enter your model number on RepairClinic.com to find the exact replacement control board, display board, wire harness, or other parts that fit your refrigerator.

01 - Ikea Refrigerator Dispenser Control Board

If the refrigerator display appears completely dead, it's possible the dispenser control board has failed. You should inspect the board for any burn marks and replace it if it appears damaged.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Incoming Power Problem

Ensure plug is tightly pushed into a regular electrical outlet and the outlet is supplying power. Using a ground fault outlet for a refrigerator is not recommended. Confirm that no circuit breakers have tripped or fuses have blown.
Highly Likely

03 - Ikea Refrigerator User Control and Display Board

If the refrigerator display appears completely dead, it's possible the user control and display board has failed. You should inspect the board for any burn marks and replace it if it appears damaged.
Common

04 - Disconnected or Damaged Wire Harness

The wires from the control panel to the control board may be loose or have become disconnected. Make sure the wire harness connectors are tight. A damaged wire harness will need to be replaced.
Common

05 - Power reset

After a power surge or power outage, refrigerator operation could be temporarily affected. Full operation can sometimes be restored through a power reset by either unplugging the appliance's power cord for a few minutes and then plugging it back in or switching off the circuit breaker for the refrigerator then switching it back on.
Common

06 - Ikea Refrigerator Control Board

If nothing is working on the refrigerator, it's likely the control board is defective. However, this is almost never the cause. Before replacing the main control board, test all of more commonly defective parts. If none of the other components are defective, consider replacing the control board.
Less Common

Frequently Asked Questions

My refrigerator display is completely dead and the fridge is not running. What should I check first?
How can I tell if the incoming power or outlet is the problem?
Could a disconnected or damaged wire harness make my refrigerator look dead?
Should I replace the main control board, dispenser control board, or the display board?
How do I use my model number or part number on RepairClinic.com to find the right replacement part?

Shop by Ikea Refrigerator Parts