Choose Product
Identify Problem
03
Find Solutions

Samsung Refrigerator beeping/alarm sounding

If your Samsung fridge is beeping or the refrigerator alarm is sounding, start by looking for a fault code on the display and check the owner’s manual or online fault code list to narrow the cause. Next, consider a simple power outage reset: flip the breaker off for a few minutes and back on to clear a PO or PF code. If the alarm keeps sounding with the fridge otherwise cooling, a failing door switch is a common culprit because a bad switch can tell the control the door is open; you can test the switch for continuity with a multimeter and replace it if it fails. If the switch and cooling are fine, the noise often traces to electronics such as the dispenser control board, the user control and display board, or the main control board. Repair Clinic carries those parts and step-by-step guides, and you can enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator and get instructions that match your model.

01 - Check Fault Codes

When a refrigerator is beeping, a fault code will usually be displayed to help diagnose the issue. Refer to the owner's manual or do an on-line search for fault code designations and possible solutions.
Top Solution

02 - Power outage reset

After a power outage the refrigerator display will typically beep and/or flash a code like PO for power outage or PF for power failure. Try turning the breaker off for a few minutes then back on to reset the refrigerator or refer to the owner's manual for specific resetting information.
Highly Likely

03 - Samsung Refrigerator Door Switch

A refrigerator door switch is used to turn on the interior lights when a door is opened and to ensure the door with a water and ice dispenser is closed before dispensing ice. If the switch is defective, it may signal to the control that a door is open even when it is fully closed resulting in a beeping alarm sound. You can use a multimeter to test the door switch for appropriate electrical continuity. If the switch does not test appropriately, it should be replaced.
Enter model number to search for the required part specific to your product
Common

04 - Samsung Refrigerator Dispenser Control Board

If the refrigerator is cooling properly and the door switch is functioning normally, a faulty dispenser control board could be the cause of the beeping noise. Replace the old control board with a new one to see if that resolves the problem.
Less Common

05 - Samsung Refrigerator User Control and Display Board

To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the user control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.
Less Common

06 - Samsung Refrigerator Control Board

If the refrigerator is cooling properly and the door switch is functioning normally, a faulty control board could be the cause of the beeping noise. Replace the old control board with a new one to see if that resolves the problem.
Less Common

Frequently Asked Questions

My refrigerator is beeping with the door closed — what could be causing it?
What does PO or PF mean when my refrigerator beeps after a power outage?
How do I test the refrigerator door switch?
Can a control board cause the refrigerator to beep even if it is cooling normally?
How do I find and buy the correct replacement part on RepairClinic.com?

Shop by Samsung Refrigerator Parts