Choose Product
Identify Problem
03
Find Solutions

Goldstar Refrigerator beeping/alarm sounding

If your Goldstar refrigerator is beeping or the refrigerator alarm is sounding, start by checking the display for a fault code and look up that code in your owner's manual or online to point you toward the problem. A common, easy fix is a power outage reset: flip the breaker off for a few minutes and back on to clear power-failure codes. If the fridge is beeping with the door closed, the door switch is a likely culprit; it can tell the control the door is open and trigger the alarm, and you can test it for continuity with a multimeter and replace it if it fails. If cooling is normal and the door switch tests good, the dispenser control board often causes intermittent beeping. Less commonly, a faulty user control and display board or the main control board will be at fault, especially if buttons or the display are unresponsive. Enter your model number at RepairClinic.com to find the exact replacement part for your refrigerator and the step-by-step parts and diagrams to complete the repair.

01 - Check Fault Codes

When a refrigerator is beeping, a fault code will usually be displayed to help diagnose the issue. Refer to the owner's manual or do an on-line search for fault code designations and possible solutions.
Top Solution

02 - Power outage reset

After a power outage the refrigerator display will typically beep and/or flash a code like PO for power outage or PF for power failure. Try turning the breaker off for a few minutes then back on to reset the refrigerator or refer to the owner's manual for specific resetting information.
Highly Likely

03 - Goldstar Refrigerator Door Switch

A refrigerator door switch is used to turn on the interior lights when a door is opened and to ensure the door with a water and ice dispenser is closed before dispensing ice. If the switch is defective, it may signal to the control that a door is open even when it is fully closed resulting in a beeping alarm sound. You can use a multimeter to test the door switch for appropriate electrical continuity. If the switch does not test appropriately, it should be replaced.
Enter model number to search for the required part specific to your product
Common

04 - Goldstar Refrigerator Dispenser Control Board

If the refrigerator is cooling properly and the door switch is functioning normally, a faulty dispenser control board could be the cause of the beeping noise. Replace the old control board with a new one to see if that resolves the problem.
Less Common

05 - Goldstar Refrigerator User Control and Display Board

To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the user control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.
Less Common

06 - Goldstar Refrigerator Control Board

If the refrigerator is cooling properly and the door switch is functioning normally, a faulty control board could be the cause of the beeping noise. Replace the old control board with a new one to see if that resolves the problem.
Less Common

Frequently Asked Questions

Why is my fridge beeping with the door closed?
Fridge beeping after a power outage, how do I reset it?
Refrigerator light not working — could this cause the alarm?
Refrigerator control panel not working — could that make it beep?
How do I enter my model number or part number on RepairClinic to find the correct replacement part?