Choose Product
Identify Problem
03
Find Solutions

Arctic Air Refrigerator beeping/alarm sounding

If your refrigerator is beeping or the alarm is sounding, the first thing to do is read any fault code on the display — those codes usually tell you what’s wrong. Most often the noise follows a power event, so a PO or PF code after an outage can be cleared by switching the breaker off for a few minutes and back on to reset the unit. If resetting does not stop the fridge beeping, a defective door switch is a common cause because it can tell the control board a door is open even when it is closed; test the switch for continuity with a multimeter and replace it if it fails. If the fridge is cooling normally and the door switch checks out, the dispenser control board is a likely next suspect, with the user control/display board or main control board being less common causes when buttons or the display act up or have power issues. Enter your model number on RepairClinic.com to find the exact replacement part and repair instructions for your specific refrigerator.

01 - Check Fault Codes

When a refrigerator is beeping, a fault code will usually be displayed to help diagnose the issue. Refer to the owner's manual or do an on-line search for fault code designations and possible solutions.
Top Solution

02 - Power outage reset

After a power outage the refrigerator display will typically beep and/or flash a code like PO for power outage or PF for power failure. Try turning the breaker off for a few minutes then back on to reset the refrigerator or refer to the owner's manual for specific resetting information.
Highly Likely

03 - Arctic Air Refrigerator Door Switch

A refrigerator door switch is used to turn on the interior lights when a door is opened and to ensure the door with a water and ice dispenser is closed before dispensing ice. If the switch is defective, it may signal to the control that a door is open even when it is fully closed resulting in a beeping alarm sound. You can use a multimeter to test the door switch for appropriate electrical continuity. If the switch does not test appropriately, it should be replaced.
Enter model number to search for the required part specific to your product
Common

04 - Arctic Air Refrigerator Dispenser Control Board

If the refrigerator is cooling properly and the door switch is functioning normally, a faulty dispenser control board could be the cause of the beeping noise. Replace the old control board with a new one to see if that resolves the problem.
Less Common

05 - Arctic Air Refrigerator User Control and Display Board

To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the user control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.
Less Common

06 - Arctic Air Refrigerator Control Board

If the refrigerator is cooling properly and the door switch is functioning normally, a faulty control board could be the cause of the beeping noise. Replace the old control board with a new one to see if that resolves the problem.
Less Common

Frequently Asked Questions

Why is my refrigerator beeping even though the door is closed?
How do I stop the fridge beeping after a power outage?
The refrigerator is cooling properly but it keeps beeping. What parts should I check?
Some buttons on my fridge control panel don't work and it beeps—what should I do?
How do I use my model number or part number on RepairClinic.com to find the right replacement part?

Shop by Arctic Air Refrigerator Parts