Choose Product
Identify Problem
03
Find Solutions

Inglis Refrigerator ice maker not working

If your ice maker is not working and your refrigerator is not making ice, start with the parts most often at fault: the main control board, which supplies voltage to the ice maker and can fail without obvious symptoms; a freezer that is too warm (above about 10°F), which prevents efficient ice production; and the water inlet valve, which needs adequate pressure (about 20 psi) and voltage to fill the ice tray. If those check out, a faulty ice maker assembly itself is a common cause and many times the entire module must be replaced. Less likely but still possible are a bad dispenser solenoid that won’t open the ice chute and a frozen or damaged fill hose blocking water flow. Use a multimeter to confirm voltage to the valve and board, verify freezer temperature, and thaw the fill tube if it’s iced up. For parts, enter your model number on RepairClinic.com to find the exact replacement ice maker parts and water inlet valve you need for straightforward ice maker repair.

01 - Inglis Refrigerator Main Control Board

The refrigerator's main control board controls the voltage being sent to the ice maker. If the control board is defective, the ice maker may not work at all. You can inspect the board for signs of damage or a shorted component. You can also use a multimeter to determine if voltage is reaching the ice maker after reviewing the refrigerator's wiring diagram.
Enter model number to search for the required part specific to your product
Top Solution

02 - Freezer Temperature is Above 10 Degrees F (-12C)

If the freezer temperature is above 10 degrees Fahrenheit (-12 Celsius), the ice maker will not produce ice cubes efficiently. The freezer temperature should be set between 0 and 5 degrees Fahrenheit (-18 to -15 Celsius) for the ice maker to work properly.
Top Solution

03 - Inglis Refrigerator Water Inlet Valve

The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won’t fill with water to make ice, replace th...e water inlet valve.
Highly Likely

04 - Inglis Refrigerator Ice Maker Assembly

One component of the ice maker assembly might be defective. Since many of the ice maker components are not sold separately, you may need to purchase and replace the entire ice maker assembly. Before replacing the ice maker assembly, check the water inlet valve, water line, and fan. If none of these parts are at fault, and the freezer temperature is at least 15 degrees Fahrenheit, replace the ice maker assembly.
Common

05 - Inglis Refrigerator Dispenser Solenoid

The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won't open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
Common

06 - Inglis Refrigerator Fill Hose

If there is low water pressure coming into the refrigerator, or the water inlet valve is defective, the ice maker's fill tube can become clogged with ice and prevent water from entering the ice maker tray. You can use a hair dryer to thaw out the frozen fill tube, but you should confirm the home has sufficient water pressure and the water inlet valve is functioning properly. If the fill tube appears damaged, you should replace it with a new fill tube.
Common

Frequently Asked Questions

Ice maker not making ice — what should I check first?
Freezer cold but ice maker not working — why won’t it make ice?
How do I test the water inlet valve and water pressure for my ice maker?
Ice dispenser not working — how do I know if the dispenser solenoid is bad?
How do I enter my model or part number on RepairClinic to get the right replacement part?

Shop by Inglis Refrigerator Parts