Choose Product
Identify Problem
03
Find Solutions

Kelvinator Refrigerator freezer is cold but refrigerator is warm

If your Kelvinator freezer is cold but the refrigerator compartment is warm, the most common culprit is a defrost system failure that leaves the evaporator coils frosted over and chokes airflow. Next likelihoods are a failed evaporator fan motor that is not circulating cold air, a door that is not closing fully because bins or shelves are misaligned or overloaded, a faulty temperature control thermostat that is not calling for cooling, a torn or warped door gasket that leaks cold air, and a stuck or broken air damper that won’t admit enough cold air to the fridge. For a quick diagnosis, open the freezer panel to look for heavy frost on the coils and test the defrost heater and timer, try spinning the evaporator fan blade by hand and listen for unusual noise, check that the door seals and shelves allow a full shut, and verify the thermostat clicks when turned. If you need parts, enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator when the fridge not cooling but freezer works or the refrigerator warm but freezer cold problem requires a repair.

01 - The Evaporator Coils are Frosted Over

The defrost heater assembly turns on a few times throughout the day to melt away any frost that may have accumulated on the evaporator coils. If the defrost heater assembly is defective, frost will continue to accumulate on the evaporator coils, and the coils will become plugged with frost. If the evaporator coils are frosted over, the airflow through the coils will be restricted, causing the refrigerator not to cool. Check the evaporator coils to determine if they are frosted over. If the evaporator coils are frosted over, test each component of the defrost system.
Top Solution

02 - Kelvinator Refrigerator Evaporator Fan Motor

The evaporator fan motor draws cold air over the evaporator coils and circulates it throughout the freezer. If the evaporator fan is not working, the freezer or refrigerator will not cool adequately. To determine if the evaporator fan motor is defective, try turning the fan blade by hand. If the fan blade does not turn freely, replace the fan motor. Additionally, if the motor is unusually noisy, replace it. Finally, if the motor does not run at all, use a multimeter to test the motor windings for continuity. If the windings do not have continuity, replace the evaporator fan motor..
Enter model number to search for the required part specific to your product
Top Solution

03 - Door not closing all the way

Misaligned door bins and shelving, or an excess of food items, may be keeping the door slightly open and prevent the refrigerator from cooling properly. Make sure the shelves and door bins are in the proper locations and avoid overloading the bins and shelves with food items.
Top Solution

04 - Kelvinator Refrigerator Temperature Control Thermostat

The temperature control thermostat directs voltage to the compressor, evaporator fan motor, and condenser fan motor (if applicable). If the temperature control thermostat is not working properly, it may prevent the refrigerant system from running properly, resulting in the refrigerator compartment not cooling as expected. To determine if the thermostat is defective, rotate the thermostat from the lowest setting to the highest setting and listen for a click. If the thermostat clicks, it is not likely defective. If the thermostat does not click, use a multimeter to test the thermostat for continuity. If the temperature contr...ol thermostat does not have continuity at any setting, replace it.
Highly Likely

05 - Kelvinator Refrigerator Door Gasket

A refrigerator door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, resulting in the refrigerator compartment being warm even though the freezer compartment is cold. Inspect the door gasket for any damage and replace with a new one if necessary.
Highly Likely

06 - Kelvinator Refrigerator Damper Control Assembly

The air damper control opens and closes to let the proper amount of cold air into the refrigerator compartment. If the damper does not open properly, it won’t let enough cold air into the refrigerator. Check the damper control to determine if it is broken or stuck closed.
Highly Likely

Frequently Asked Questions

Why is my freezer cold but fridge warm?
How can I test the evaporator fan motor when the fridge is not cooling?
How do I know if the defrost heater assembly or defrost system is failing?
Can a bad door gasket or a door that won’t close cause the fridge to be warm?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?

Shop by Kelvinator Refrigerator Parts