If your refrigerator coffee maker is leaking, start by checking the coffee container for cracks or holes — a damaged container is often the culprit. Next inspect the tube or hose that runs to the dispenser for splits or pinholes, especially if the leak shows up behind the dispenser. A stuck water inlet valve caused by a faulty control board or control board assembly can also leave the valve open and overfill the brewer, so look for signs of burned or shorted components and confirm the valve itself is closing before you replace boards. Don’t forget simple causes: a K-Cup that isn’t pierced or clogged brew pins can let water spill out, and a damaged door assembly can sometimes contribute to leaks. These checks will narrow down why the refrigerator coffee maker is leaking and whether you need a new container, hose, valve, or control board. Enter your model number on RepairClinic.com to find the exact replacement part that fits your fridge and get step-by-step parts and repair guidance.
01 - Amana Refrigerator Hose
If the refrigerator coffee maker is leaking behind the dispenser, it's likely the tube or hose connected to the dispenser has a crack or a hole in it. Inspect the tube or hose for damage and replace if required.
Enter model number to search for the required part specific to your product
Although it is not a common cause, a damaged door assembly could be causing the refrigerator coffee maker to leak. Inspect the door for any cracks or damage and replace if required.
If the refrigerator coffee maker is leaking, it's possible the coffee maker is dispensing too much water. This can be caused by a defective control board assembly continuing to allow voltage to be sent to the water dispensing valve, keeping the valve open. You can inspect the board assembly for signs of burning or a shorted-out component. You should first confirm there are no cracks or holes in the coffee maker container or hoses connected to the dispenser, as well as determine the dispensing valve is functioning normally before considering a control board assembly replacement.
If the K-Cup pod is not pushed down firmly, the lower pin may not pierce through the pod. If the pins are clogged or not piercing all the way through the K-Cup, water may leak from the coffee maker. If the upper or lower pins are clogged, they can be cleaned with a paper clip.
Common
05 - Amana Refrigerator Control Board
If the refrigerator coffee maker is leaking, it's possible the coffee maker is dispensing too much water. This can be caused by a defective control board continuing to allow voltage to be sent to the water inlet valve, keeping the valve open. You can inspect the control board for signs of burning or a shorted-out component. You should first confirm there are no cracks or holes in the coffee maker container or hoses connected to the dispenser, as well as determine the inlet valve is functioning normally before considering a control board replacement.
The most likely cause of a refrigerator coffee maker leaking is a damaged container. Inspect the coffee maker container for any cracks or holes and replace if required.