Choose Product
Identify Problem
03
Find Solutions

KitchenAid Refrigerator coffee maker leaking

If your refrigerator coffee maker is leaking behind the dispenser, start by checking the tube or hose for a crack or hole — a damaged hose is a common culprit and easy to replace. Next, inspect the door assembly for any visible damage that could let water escape. A faulty control board or control board assembly can also cause the dispenser to run too long and overfill by sending continuous voltage to the inlet or dispensing valve, so look for burned components and confirm the valve is closing. Don’t forget simple causes: a K-Cup not pierced fully or clogged piercing pins can let water spill out, and the coffee maker container itself can crack or develop holes. This kind of fridge leaking water from the dispenser won’t always flood the floor, but it will drip or pool around the dispenser area. If you need parts, enter your model number on RepairClinic.com to find the exact replacement hose, container, control board, valve or other part that fits your refrigerator.

01 - KitchenAid Refrigerator Hose

If the refrigerator coffee maker is leaking behind the dispenser, it's likely the tube or hose connected to the dispenser has a crack or a hole in it. Inspect the tube or hose for damage and replace if required.
Enter model number to search for the required part specific to your product
Top Solution

02 - KitchenAid Refrigerator Door

Although it is not a common cause, a damaged door assembly could be causing the refrigerator coffee maker to leak. Inspect the door for any cracks or damage and replace if required.
Top Solution

03 - KitchenAid Refrigerator Control Board Assembly

If the refrigerator coffee maker is leaking, it's possible the coffee maker is dispensing too much water. This can be caused by a defective control board assembly continuing to allow voltage to be sent to the water dispensing valve, keeping the valve open. You can inspect the board assembly for signs of burning or a shorted-out component. You should first confirm there are no cracks or holes in the coffee maker container or hoses connected to the dispenser, as well as determine the dispensing valve is functioning normally before considering a control board assembly replacement.
Highly Likely

04 - K-Cup pod Is not pierced or pin is clogged

If the K-Cup pod is not pushed down firmly, the lower pin may not pierce through the pod. If the pins are clogged or not piercing all the way through the K-Cup, water may leak from the coffee maker. If the upper or lower pins are clogged, they can be cleaned with a paper clip.
Common

05 - KitchenAid Refrigerator Control Board

If the refrigerator coffee maker is leaking, it's possible the coffee maker is dispensing too much water. This can be caused by a defective control board continuing to allow voltage to be sent to the water inlet valve, keeping the valve open. You can inspect the control board for signs of burning or a shorted-out component. You should first confirm there are no cracks or holes in the coffee maker container or hoses connected to the dispenser, as well as determine the inlet valve is functioning normally before considering a control board replacement.
Common

06 - KitchenAid Refrigerator Container

The most likely cause of a refrigerator coffee maker leaking is a damaged container. Inspect the coffee maker container for any cracks or holes and replace if required.
Less Common

Frequently Asked Questions

Why is my refrigerator leaking water from the coffee maker?
How do I troubleshoot the water inlet valve or control board causing a coffee maker leak?
My K-Cup pod is not pierced and water is leaking. What should I check?
Where do I enter my model number or part number on RepairClinic.com to find the correct replacement part?
Can a damaged refrigerator door cause the coffee maker to leak?

Shop by KitchenAid Refrigerator Parts