Choose Product
Identify Problem
03
Find Solutions

U-Line Refrigerator coffee maker leaking

If your U-Line refrigerator coffee maker is leaking behind the dispenser, the most likely cause is a cracked or holey tube or hose feeding the brewer, so start by inspecting and replacing any damaged tubing. Less common causes include a damaged door assembly that lets water track where it should not, and a faulty control board or control board assembly that keeps voltage applied to the inlet or dispensing valve so water keeps flowing. Also check the K-Cup pins and holder; if a pod is not fully pierced or a pin is clogged, water can escape instead of flowing through the pod. Finally, inspect the coffee container for cracks or holes. Walk through those checks in that order: hose, door, valve operation and control board, K-Cup piercing, then container. If you need a replacement part, enter your refrigerator model number at RepairClinic.com to see the exact hose, valve, control board, container, or door parts that fit your unit and get back to fixing it quickly.

01 - U-Line Refrigerator Hose

If the refrigerator coffee maker is leaking behind the dispenser, it's likely the tube or hose connected to the dispenser has a crack or a hole in it. Inspect the tube or hose for damage and replace if required.
Enter model number to search for the required part specific to your product
Top Solution

02 - U-Line Refrigerator Door

Although it is not a common cause, a damaged door assembly could be causing the refrigerator coffee maker to leak. Inspect the door for any cracks or damage and replace if required.
Top Solution

03 - U-Line Refrigerator Control Board Assembly

If the refrigerator coffee maker is leaking, it's possible the coffee maker is dispensing too much water. This can be caused by a defective control board assembly continuing to allow voltage to be sent to the water dispensing valve, keeping the valve open. You can inspect the board assembly for signs of burning or a shorted-out component. You should first confirm there are no cracks or holes in the coffee maker container or hoses connected to the dispenser, as well as determine the dispensing valve is functioning normally before considering a control board assembly replacement.
Highly Likely

04 - K-Cup pod Is not pierced or pin is clogged

If the K-Cup pod is not pushed down firmly, the lower pin may not pierce through the pod. If the pins are clogged or not piercing all the way through the K-Cup, water may leak from the coffee maker. If the upper or lower pins are clogged, they can be cleaned with a paper clip.
Common

05 - U-Line Refrigerator Control Board

If the refrigerator coffee maker is leaking, it's possible the coffee maker is dispensing too much water. This can be caused by a defective control board continuing to allow voltage to be sent to the water inlet valve, keeping the valve open. You can inspect the control board for signs of burning or a shorted-out component. You should first confirm there are no cracks or holes in the coffee maker container or hoses connected to the dispenser, as well as determine the inlet valve is functioning normally before considering a control board replacement.
Common

06 - U-Line Refrigerator Container

The most likely cause of a refrigerator coffee maker leaking is a damaged container. Inspect the coffee maker container for any cracks or holes and replace if required.
Less Common

Frequently Asked Questions

Refrigerator leaking water behind the coffee maker. What are the most likely causes?
Is the control board causing the coffee maker to dispense too much water?
Could a cracked hose be the reason my dispenser is leaking, and how do I check it?
K-Cup pods are leaking or not being pierced. How do I fix clogged or bent pins?
How do I enter my model number on RepairClinic.com to find the right part?