Choose Product
Identify Problem
03
Find Solutions

E-Wave Refrigerator coffee maker leaking

If your refrigerator coffee maker is leaking behind the dispenser and leaving water under the unit, start by checking the coffee container for cracks or holes—this is often the culprit. Next inspect the small tubing and hoses that feed the dispenser for splits or pinholes that let water escape. A control board or control board assembly that leaves voltage on the water inlet valve can also cause continuous flow and leaks, so look for burned components and confirm the valve is closing. Less obvious but still common causes include a K-Cup pod not pierced properly or clogged piercing pins, which lets water spray out, and, rarely, damage to the door assembly around the dispenser. If you find a cracked container, split hose, faulty valve, or a bad board, you can order the replacement parts you need at RepairClinic.com. Enter your refrigerator model number on the site to see parts that fit your exact fridge and get diagrams and repair steps to fix the leak.

01 - E-Wave Refrigerator Hose

If the refrigerator coffee maker is leaking behind the dispenser, it's likely the tube or hose connected to the dispenser has a crack or a hole in it. Inspect the tube or hose for damage and replace if required.
Enter model number to search for the required part specific to your product
Top Solution

02 - E-Wave Refrigerator Door

Although it is not a common cause, a damaged door assembly could be causing the refrigerator coffee maker to leak. Inspect the door for any cracks or damage and replace if required.
Top Solution

03 - E-Wave Refrigerator Control Board Assembly

If the refrigerator coffee maker is leaking, it's possible the coffee maker is dispensing too much water. This can be caused by a defective control board assembly continuing to allow voltage to be sent to the water dispensing valve, keeping the valve open. You can inspect the board assembly for signs of burning or a shorted-out component. You should first confirm there are no cracks or holes in the coffee maker container or hoses connected to the dispenser, as well as determine the dispensing valve is functioning normally before considering a control board assembly replacement.
Highly Likely

04 - K-Cup pod Is not pierced or pin is clogged

If the K-Cup pod is not pushed down firmly, the lower pin may not pierce through the pod. If the pins are clogged or not piercing all the way through the K-Cup, water may leak from the coffee maker. If the upper or lower pins are clogged, they can be cleaned with a paper clip.
Common

05 - E-Wave Refrigerator Control Board

If the refrigerator coffee maker is leaking, it's possible the coffee maker is dispensing too much water. This can be caused by a defective control board continuing to allow voltage to be sent to the water inlet valve, keeping the valve open. You can inspect the control board for signs of burning or a shorted-out component. You should first confirm there are no cracks or holes in the coffee maker container or hoses connected to the dispenser, as well as determine the inlet valve is functioning normally before considering a control board replacement.
Common

06 - E-Wave Refrigerator Container

The most likely cause of a refrigerator coffee maker leaking is a damaged container. Inspect the coffee maker container for any cracks or holes and replace if required.
Less Common

Frequently Asked Questions

Why is my refrigerator coffee maker leaking water?
My fridge dispenser keeps running or leaks — is the control board or inlet valve the problem?
K-Cup not piercing or coffee maker leaking — how do I clean or fix the pins?
Can a damaged refrigerator door cause the coffee maker to leak?
How do I enter my model number on RepairClinic.com to find the correct replacement part?