Choose Product
Identify Problem
03
Find Solutions

Ikea Refrigerator coffee maker leaking

If your Ikea refrigerator coffee maker is leaking or you have refrigerator leaking water from the dispenser, the most likely cause is a faulty control board assembly that keeps voltage on the water inlet or dispense valve so the coffee maker overfills. After checking the board for burned components, inspect the tube or hose behind the dispenser for cracks or holes, since a split hose will leak fast. Next check the K-Cup pins and piercing mechanism; a pod that is not pierced or clogged pins will let water run out instead of through the cup and can usually be cleared with a paper clip. Less commonly a damaged door assembly or a cracked coffee container will let water escape. Confirm the valve is operating normally and rule out physical leaks in hoses or the container before replacing control electronics. Enter your model number on RepairClinic.com to find the exact replacement control board, hose, container, valve, or other parts that fit your refrigerator.

01 - Ikea Refrigerator Hose

If the refrigerator coffee maker is leaking behind the dispenser, it's likely the tube or hose connected to the dispenser has a crack or a hole in it. Inspect the tube or hose for damage and replace if required.
Enter model number to search for the required part specific to your product
Top Solution

02 - Ikea Refrigerator Door

Although it is not a common cause, a damaged door assembly could be causing the refrigerator coffee maker to leak. Inspect the door for any cracks or damage and replace if required.
Top Solution

03 - Ikea Refrigerator Control Board Assembly

If the refrigerator coffee maker is leaking, it's possible the coffee maker is dispensing too much water. This can be caused by a defective control board assembly continuing to allow voltage to be sent to the water dispensing valve, keeping the valve open. You can inspect the board assembly for signs of burning or a shorted-out component. You should first confirm there are no cracks or holes in the coffee maker container or hoses connected to the dispenser, as well as determine the dispensing valve is functioning normally before considering a control board assembly replacement.
Highly Likely

04 - K-Cup pod Is not pierced or pin is clogged

If the K-Cup pod is not pushed down firmly, the lower pin may not pierce through the pod. If the pins are clogged or not piercing all the way through the K-Cup, water may leak from the coffee maker. If the upper or lower pins are clogged, they can be cleaned with a paper clip.
Common

05 - Ikea Refrigerator Control Board

If the refrigerator coffee maker is leaking, it's possible the coffee maker is dispensing too much water. This can be caused by a defective control board continuing to allow voltage to be sent to the water inlet valve, keeping the valve open. You can inspect the control board for signs of burning or a shorted-out component. You should first confirm there are no cracks or holes in the coffee maker container or hoses connected to the dispenser, as well as determine the inlet valve is functioning normally before considering a control board replacement.
Common

06 - Ikea Refrigerator Container

The most likely cause of a refrigerator coffee maker leaking is a damaged container. Inspect the coffee maker container for any cracks or holes and replace if required.
Less Common

Frequently Asked Questions

Why is my refrigerator coffee maker leaking behind the dispenser?
How can I tell if the water inlet/dispensing valve or the control board assembly is causing the leak?
My K-Cup coffee maker is leaking. Could clogged or unpierced pins be the problem?
Do I need to replace the refrigerator door if the coffee maker keeps leaking?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?

Shop by Ikea Refrigerator Parts