Choose Product
Identify Problem
03
Find Solutions

Whirlpool Refrigerator coffee maker leaking

If your Whirlpool refrigerator coffee maker is leaking, start by checking the coffee container for cracks or holes since a damaged container is the most likely cause. Next inspect the tube or hose behind the dispenser for splits or pinholes that let water leak, then look at the control board or control board assembly—if it sticks on it can keep voltage applied to the inlet valve and let water run continuously. Also check the K-Cup pins and pod seating; an unpierced or clogged pin can send water where it should not go and make the unit overflow. A damaged door assembly is less common but worth a quick look for cracks near the dispenser. These steps cover the usual fixes for a refrigerator leaking water or a fridge leaking water from the dispenser; clean clogged pins with a paper clip, test the inlet valve, and inspect wiring and boards for burn marks before replacing parts. Enter your model number on RepairClinic.com to find the exact replacement container, hose, valve, or control board for your refrigerator.

01 - Whirlpool Refrigerator Hose

If the refrigerator coffee maker is leaking behind the dispenser, it's likely the tube or hose connected to the dispenser has a crack or a hole in it. Inspect the tube or hose for damage and replace if required.
Enter model number to search for the required part specific to your product
Top Solution

02 - Whirlpool Refrigerator Door

Although it is not a common cause, a damaged door assembly could be causing the refrigerator coffee maker to leak. Inspect the door for any cracks or damage and replace if required.
Top Solution

03 - Whirlpool Refrigerator Control Board Assembly

If the refrigerator coffee maker is leaking, it's possible the coffee maker is dispensing too much water. This can be caused by a defective control board assembly continuing to allow voltage to be sent to the water dispensing valve, keeping the valve open. You can inspect the board assembly for signs of burning or a shorted-out component. You should first confirm there are no cracks or holes in the coffee maker container or hoses connected to the dispenser, as well as determine the dispensing valve is functioning normally before considering a control board assembly replacement.
Highly Likely

04 - K-Cup pod Is not pierced or pin is clogged

If the K-Cup pod is not pushed down firmly, the lower pin may not pierce through the pod. If the pins are clogged or not piercing all the way through the K-Cup, water may leak from the coffee maker. If the upper or lower pins are clogged, they can be cleaned with a paper clip.
Common

05 - Whirlpool Refrigerator Control Board

If the refrigerator coffee maker is leaking, it's possible the coffee maker is dispensing too much water. This can be caused by a defective control board continuing to allow voltage to be sent to the water inlet valve, keeping the valve open. You can inspect the control board for signs of burning or a shorted-out component. You should first confirm there are no cracks or holes in the coffee maker container or hoses connected to the dispenser, as well as determine the inlet valve is functioning normally before considering a control board replacement.
Common

06 - Whirlpool Refrigerator Container

The most likely cause of a refrigerator coffee maker leaking is a damaged container. Inspect the coffee maker container for any cracks or holes and replace if required.
Less Common

Frequently Asked Questions

My refrigerator is leaking water from the coffee maker—what usually causes that?
Could a bad control board cause my refrigerator coffee maker to overfill or leak?
The K-Cup pod isn’t pierced and the coffee maker is leaking—how do I fix the piercing pin?
Where do I enter my model number or part number on RepairClinic.com to find the right replacement part?
What should I check first if the coffee maker keeps leaking even though the K-Cup and pins look OK?

Shop by Whirlpool Refrigerator Parts