If your Jenn Air refrigerator coffee maker is not working, the most common problems are easy to fix and usually involve the water supply, a clogged brewing pin, or the brewer not being seated correctly. First check that the water supply to the fridge is turned on and that the fridge water dispenser is actually delivering cold water; slow flow often means a clogged or old water filter, which should be replaced about every six months, or a blocked water supply tube. If water is present, remove the brewing module and rinse it; the upper or lower pin can get clogged with coffee grounds or mineral buildup and can be cleared with a paper clip. Finally, make sure the brewer is installed on the rails with the name plate facing you and that it is fully seated, since the unit needs to be removed and reinserted between brews to register properly. If a part is worn or broken, enter your model number at RepairClinic.com to find the exact replacement part for your refrigerator.
01 - Jenn Air Refrigerator Water Supply Tube
Make sure you are getting cold water at the dispenser. If not, check that the water supply to the refrigerator is turned on. If the water flow is slow, try replacing the water filter; the water filter should be replaced every 6 months.
Enter model number to search for the required part specific to your product
After each use the brewing module should be removed and rinsed with water. If the upper or lower pin gets clogged, you can use a paper clip to clean out the holes.
With the brewing module inserted on the rails, the brewer's name plate must be facing the user and must be removed and reinstalled to dispense another cup.
Less Common
Frequently Asked Questions
Why is my Jenn Air refrigerator coffee maker not working?
Fridge water dispenser not working or water is very slow, what should I check?
How do I clean the upper or lower pin in the brewing module?
The brewer is installed but it will not dispense another cup. What am I missing?
How do I enter my model number or part number on RepairClinic.com to find the right replacement part?