When your KitchenAid refrigerator coffee maker is not working, start with the most likely culprit: the water supply. Confirm the water to the fridge is turned on and that you get cold water from the dispenser; if the fridge water dispenser is not working or the flow is slow, replace the water filter and check the supply tube. Next, remove the brewing module and rinse it—blocked upper or lower pins from mineral buildup or grounds are common, and you can clear the pin holes with a straightened paper clip. Finally, verify the brewer is installed correctly on the rails with the name plate facing you; an improperly seated brewer will prevent another cup from dispensing. If a component is worn or damaged, enter your model number at RepairClinic.com to find the exact replacement water supply tube, brewer parts, pins, or filter that fit your refrigerator and get back to brewing quickly.
01 - KitchenAid Refrigerator Water Supply Tube
Make sure you are getting cold water at the dispenser. If not, check that the water supply to the refrigerator is turned on. If the water flow is slow, try replacing the water filter; the water filter should be replaced every 6 months.
Enter model number to search for the required part specific to your product
After each use the brewing module should be removed and rinsed with water. If the upper or lower pin gets clogged, you can use a paper clip to clean out the holes.
With the brewing module inserted on the rails, the brewer's name plate must be facing the user and must be removed and reinstalled to dispense another cup.
Less Common
Frequently Asked Questions
Fridge water dispenser not working — what should I check?
My refrigerator coffee maker is not brewing — what can cause that?
How do I clean clogged pins in the coffee brewer?
Ice maker not making ice — could this be the same water problem?
How do I enter my model number to find the right part on RepairClinic.com?