If your Haier fridge coffee maker won’t brew, most often the problem is a lack of water reaching the brewer. Start by checking the water supply to the refrigerator and the dispenser; if you get no cold water at the dispenser, confirm the shutoff valve is open and the water supply tube is undamaged. Slow flow is commonly caused by a clogged water filter, so replace the filter if it’s older than six months. Next, check the brewer pins and brewing module: mineral buildup or coffee grounds can clog the upper or lower pin—use a paper clip to clear the holes and rinse the brewing module after each use. Finally, make sure the brewer is seated correctly on its rails with the nameplate facing you; an improperly installed brewer won’t engage and dispense a cup. RepairClinic stocks the water supply tube, replacement water filters, pins and brewer parts you’ll need, and you can enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator.
01 - Haier Refrigerator Water Supply Tube
Make sure you are getting cold water at the dispenser. If not, check that the water supply to the refrigerator is turned on. If the water flow is slow, try replacing the water filter; the water filter should be replaced every 6 months.
Enter model number to search for the required part specific to your product
After each use the brewing module should be removed and rinsed with water. If the upper or lower pin gets clogged, you can use a paper clip to clean out the holes.
With the brewing module inserted on the rails, the brewer's name plate must be facing the user and must be removed and reinstalled to dispense another cup.
Less Common
Frequently Asked Questions
My Haier refrigerator coffee maker is not working. What should I check first?
Refrigerator water dispenser not working. Could that be why the coffee maker won’t brew?
How do I clean a clogged Haier coffee maker pin?
Brewer not installed properly. How should the brewing module sit in the fridge?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?