Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpNorge Refrigerator RepairNorge Refrigerator door not opening/closing properly Repair
Norge Refrigerator door not opening/closing properly
If your refrigerator door is not closing properly or the fridge door is not sealing, start with the gasket—twists, kinks, or worn sections are the most common cause and a warped gasket can sometimes be smoothed with a hair dryer; replace it if it is damaged. Next check the door catch or door cam, since a worn or broken cam will prevent the door from latching. A sagging door is often the result of a bent or damaged bottom hinge, followed by problems with the top hinge, so inspect both hinges, mounting screws, and pivot points for wear or looseness. On French-door models a bad door support or a misaligned mullion heater flap can keep the doors from closing fully. If multiple hinge pieces show wear, a door hinge kit will restore alignment. These checks address the most likely reasons a refrigerator door will not close or a refrigerator door will not open properly. Enter your model number on RepairClinic.com to find the exact replacement gasket, hinge, cam, or door support for your specific refrigerator.
01 - Norge Refrigerator Door Gasket
A twisted or worn gasket can keep the door from closing properly. Inspect the door gasket for kinks or twists. You can use a hair dryer to try smoothing out the kinks. If the door gasket is damaged it will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution
02 - Norge Refrigerator Door Catch
The door cam helps the door to close. If the door cam is worn or broken the door may not close properly. Inspect the door cam for damage, and replace it if needed.
Highly Likely
03 - Norge Refrigerator Bottom Hinge
A damaged or bent bottom hinge could cause the freezer door to sag and not close properly. Inspect the hinge for defects and replace if necessary.
Common
04 - Norge Refrigerator Top Hinge
A damaged or bent bottom hinge could cause the freezer door to sag and not close properly. Inspect the hinge for defects and replace if necessary.
Common
05 - Norge Refrigerator Door Support
A refrigerator door support is often used on French Door models to flip a mullion heater flap to seal the gap between the doors. If the door support is damaged or misaligned, the mullion heater flap may not be positioned appropriately for the door or doors to close completely. Inspect the support for damage and replace if necessary.
Common
06 - Norge Refrigerator Door Hinge Kit
A damaged or bent bottom hinge could cause the freezer door to sag and not close properly. Inspect the hinge for defects and replace if necessary.
Common
Frequently Asked Questions
Why is my refrigerator door not closing properly?
How can I tell if the gasket needs replacing or just needs to be smoothed out?
The freezer closes but the fridge door won’t seal. What should I check?
How do I adjust a misaligned refrigerator door?
How do I use my model number or part number on RepairClinic.com to buy the right replacement?
Shop by Norge Refrigerator Parts
Shop by Popular Norge Refrigerator Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com