Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpIkea Refrigerator RepairIkea Refrigerator freezer not freezing Repair
Ikea Refrigerator freezer not freezing
If your freezer is not freezing or the freezer compartment feels warm while the rest of the fridge seems normal, start with the evaporator fan motor — it circulates cold air and is the most common single point of failure. After that check the freezer door gasket for tears or gaps that let warm air in, then inspect the condenser fan motor and blades for obstruction or failure. Control boards are often blamed but should be replaced only after the fans, gasket, thermostat and relay have been ruled out. Also test the temperature control thermostat for a click and continuity, and check the start relay for continuity or a burnt odor if the compressor is reluctant to run. These quick checks cover the likeliest causes when a freezer is not freezing or a refrigerator freezer is not cold enough. Enter your model number on RepairClinic.com to find the exact replacement evaporator fan, gasket, condenser fan motor, thermostat, relay or control board that fits your refrigerator.
01 - Ikea Refrigerator Evaporator Fan Motor
The evaporator fan motor draws air over the evaporator (cooling) coils and circulates it throughout the refrigerator and freezer compartments. Some refrigerators have more than one evaporator fan motor. On refrigerators with two evaporators, there will be an evaporator located in both the freezer and refrigerator compartments. If the evaporator fan is not working, it will not circulate the cold air in the compartment. If this occurs, the refrigerator may still get cold, while the freezer will not get cold or vice versa. To determine if the evaporator fan motor is defective, try turning the fan blade by hand. If the fan bla...
Enter model number to search for the required part specific to your product
Top Solution
02 - Ikea Refrigerator Door Gasket
A freezer door gasket should form an airtight seal around the appliance's frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, resulting in the freezer not freezing properly. Inspect the door gasket for any damage and replace with a new one if necessary.
Highly Likely
03 - Ikea Refrigerator Condenser Fan Motor
The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly. To determine if the fan motor is defective, first check the fan blade for obstructions. Next, try turning the fan motor blade by hand. If the blade does not spin freely, replace the condenser fan motor. If no obstructions are present and the fan blade spins freely, use a multimeter to test the fan motor for continuity. If the condenser fan motor does not have continuity, replace it.
Common
04 - Ikea Refrigerator Control Board
Control boards are often misdiagnosed—before replacing the control board, first check more commonly defective parts. If you have determined that all of the other components are working properly, replace the control board.
Common
05 - Ikea Refrigerator Temperature Control Thermostat
The temperature control thermostat directs voltage to the compressor, evaporator fan motor, and condenser fan motor (if applicable). If the temperature control thermostat is not working properly, it may prevent the freezer's refrigerant system from running. To determine if the thermostat is defective, rotate the thermostat from the lowest setting to the highest setting and listen for a click. If the thermostat clicks, it is not likely defective. If the thermostat does not click, use a multimeter to test the thermostat for continuity. If the temperature control thermostat does not have continuity at any setting, replace it.
Common
06 - Ikea Refrigerator Start Relay
The start relay works in conjunction with the start winding to start the compressor. If the start relay is defective, the compressor may sometimes fail to run or may not run at all. As a result, the freezer will not be able to freeze properly. To determine if the start relay is defective, use a multimeter to test it for continuity between the run and start terminal sockets. If the start relay does not have continuity between the run and start terminal sockets, replace it. In addition, if the start relay has a burnt odor, replace it.
Common
Frequently Asked Questions
Freezer not freezing but fridge is cold — what parts should I check?
My refrigerator is not cooling at all — which parts are most likely causing this?
How do I test an evaporator or condenser fan motor?
How can I tell if I need a new start relay or control board?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?
Shop by Ikea Refrigerator Parts
Shop by Popular Ikea Refrigerator Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com