Choose Product
Identify Problem
03
Find Solutions

Viking Refrigerator ice is dirty

01 - Viking Refrigerator Water Supply Tube

During normal use the water supply tubes will have water flowing through them keeping them clean. If the water supply gets disconnected or water is left in the tube and not used for 6 to 12 months, it can become discolored. If the water at the other faucets in the house is ok and you have replaced the water filter you may need to replace the water tubing to the ice maker to resolve the issue.
Enter model number to search for the required part specific to your product
Top Solution

02 - Viking Refrigerator Ice Maker Assembly

If the icemaker tray has a coating, the coating may be wearing off. If you are getting pieces or chunks of material stuck in the ice, check the ice maker tray. If the coating on the tray is corroded and flaking off, replace the icemaker.
Highly Likely

03 - Dirty Water Supply

A fire hydrant that was flushed or a broken water main can cause dirty water to enter the home. Since the ice maker uses the same water supplied to the kitchen or bathroom faucets, dirty water can discolor the ice. Discard the old ice and run the water for awhile at the kitchen or bathroom faucet until the water clears up before having the ice maker make new ice.
Less Common

04 - Viking Refrigerator Water Filter

If the ice being dispensed is dirty, it's possible that residue from an old water filter is getting into the water being supplied to the ice maker. Water filters should be replaced every six months for optimum water filtration.
Uncommon But Possible