Choose Product
Identify Problem
03
Find Solutions

Hardwick Refrigerator freezing food

If your refrigerator is freezing food or running too cold, the most likely culprit is the temperature control thermostat — rotate the dial from cold to warm and listen for a click, or test it with a multimeter for continuity. Next check the thermistor, which tells the control board the actual temperature; a thermistor that does not change resistance as the fridge warms and cools will make the system overchill. A faulty temperature control board can also send continuous voltage to the compressor and fans, while the main control board is a less common cause and should be considered only after testing the other parts. Don’t forget the basics: confirm the temperature setting isn’t set too cold. Finally, a seized or faulty evaporator fan motor can circulate excessive cold into the refrigerator compartment and freeze food. These steps cover the usual reasons a fridge is too cold or a fridge is freezing food. Enter your model number on RepairClinic.com to find the exact replacement part for your specific refrigerator and the repair parts you’ll need.

01 - Hardwick Refrigerator Temperature Control Thermostat

The temperature control thermostat directs voltage to the compressor, evaporator fan motor, and condenser fan motor (if applicable). If the temperature control thermostat is not working properly, it may cause the refrigerant system to run longer than necessary. As a result, the refrigerator will be too cold. To determine if the thermostat is defective, rotate the thermostat from the lowest setting to the highest setting and listen for a click. If the thermostat clicks, it is not likely defective. If the thermostat does not click, use a multimeter to test the thermostat for continuity. If the temperature control thermostat ...does not have continuity at any setting, replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Hardwick Refrigerator Thermistor

The thermistor monitors the air temperature and sends the temperature reading to the control board. The control board then regulates power to the compressor and evaporator fan based on the thermistor readings. If the thermistor is defective, the compressor and evaporator fan may run too frequently. As a result, the refrigerator will be too cool. To determine if the thermistor is defective, test it with a multimeter. The thermistor resistance should change in conjunction with the refrigerator temperature. If the thermistor resistance does not change, or the thermistor does not have continuity, replace the thermistor.
Highly Likely

03 - Hardwick Refrigerator Temperature Control Board

The temperature control board provides voltage to the compressor and fan motors. If the control board is faulty, it may send continuous voltage to the compressor or fan motors. As a result, the refrigerator will be too cool. Control boards are often misdiagnosed—before replacing the control board, first test all of the more commonly defective components. If none of the other components are defective, consider replacing the temperature control board.
Highly Likely

04 - Hardwick Refrigerator Main Control Board

The main control board might be defective. However, the control board is very rarely the cause of the problem. Before replacing the control board, first test all of the more commonly defective components. If none of these components are defective, consider replacing the main control board.
Highly Likely

05 - Temperature set too cold

Adjust the refrigerator temperature control to a warmer setting. Many models have a recommended temperature setting displayed, usually between 34 and 38 degrees Fahrenheit (1 and 4 degrees Celsius). Wait 24 hours for the temperature to adjust appropriately.
Highly Likely

06 - Hardwick Refrigerator Evaporator Fan Motor

The refrigerator's evaporator fan motor draws air over the cold evaporator coils which chills the air. The air is then circulated through the refrigerator and freezer compartments to keep the temperature low enough to preserve food. If the evaporator fan motor is malfunctioning, the cold air from the freezer or refrigerator evaporator coils can migrate through the air ducts to the bottom of the refrigerator and freeze the food. You should try rotating the evaporator fan blades to see if they spin freely. If not, it's likely the motor bearings have seized and the motor will need to be replaced. You can also use a multimeter... to test the motor for electrical continuity. If the motor has no electrical continuity, the component won't run and a new motor will need to be installed.
Common

Frequently Asked Questions

Why is my refrigerator freezing food?
How do I test the temperature control thermostat?
Can a faulty thermistor or control board make my refrigerator too cold?
My refrigerator runs constantly and is very cold. What should I check first?
How do I enter my model number to find the correct replacement part on RepairClinic.com?