Electrolux Refrigerator ice and water dispenser not working
If your Electrolux refrigerator ice and water dispenser not working, start with the parts that most often fail: inspect the dispenser actuator first for cracks or wear that keep it from tripping the switch. If the entire dispenser assembly is dead, the dispenser control board is the next likely culprit, but test individual parts before replacing the board. Use a multimeter to check each dispenser switch for continuity, then test the door switch that disables the dispenser when the door is open. Verify drawers and the door are fully closed and gaskets seal properly, since misaligned or open doors commonly prevent the dispenser from operating. Finally, check the water filter housing and filter to make sure the housing is seated and not damaged so water can flow. Whether you search for refrigerator water dispenser not working, fridge water dispenser not working, refrigerator dispenser not dispensing water, or even ice maker not making ice, RepairClinic has the parts and instructions you need. Enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator.
01 - Electrolux Refrigerator Dispenser Actuator
The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
02 - Electrolux Refrigerator Dispenser Control Board
The dispenser control board governs most of the functions of the dispenser system. If only one dispenser part is not working, it is probable that an individual part has failed. In this case, test each of the dispenser components before testing the control board. If the entire dispenser system is not working, the control board is more likely to be at fault.
The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
The door switch turns off the ice and water dispenser when the refrigerator door is open. If the door switch fails, the dispenser will not turn on. To determine if the door switch is defective, use a multimeter to test it for continuity. If the door switch does not have continuity when activated, replace it.
Check to make sure all drawers and ice buckets are pushed in properly. Be sure the refrigerator doors are completely closed. There should be no visible gap around the door gasket.
Highly Likely
06 - Electrolux Refrigerator Water Filter Housing
On many refrigerators, the incoming water will pass through a water filter before reaching the dispenser or the ice maker fill tube. If the water filter housing is damaged, water may not flow through the housing when the filter is installed. Inspect the water filter housing for damage and confirm it is properly seated. If necessary replace the damaged housing with a new one.