Choose Product
Identify Problem
03
Find Solutions

Dacor Refrigerator ice and water dispenser not working

If your ice and water dispenser stopped working, start with the simplest issues first: check that drawers and doors are fully closed and the gasket seals are snug, since a door that is not closing properly is the most common cause of a dead dispenser. If the doors are fine, inspect the dispenser actuator for cracks or broken tabs that prevent it from tripping the switch. Next, test the dispenser switches and the door switch with a multimeter for continuity, because a failed switch is a frequent, easy-to-replace culprit. If all the mechanical parts test good but the entire dispenser system is dead, the dispenser control board may have failed. Also check the water filter housing for damage or improper seating if water will not flow. These same parts and checks cover problems where the refrigerator dispenser not dispensing water or the ice maker not making ice. You can enter your model number on RepairClinic.com to find the exact replacement parts and step-by-step repair parts for your refrigerator.

01 - Dacor Refrigerator Dispenser Actuator

The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
Top Solution

02 - Dacor Refrigerator Dispenser Control Board

The dispenser control board governs most of the functions of the dispenser system. If only one dispenser part is not working, it is probable that an individual part has failed. In this case, test each of the dispenser components before testing the control board. If the entire dispenser system is not working, the control board is more likely to be at fault.
Top Solution

03 - Dacor Refrigerator Dispenser Switch

The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Top Solution

04 - Dacor Refrigerator Door Switch

The door switch turns off the ice and water dispenser when the refrigerator door is open. If the door switch fails, the dispenser will not turn on. To determine if the door switch is defective, use a multimeter to test it for continuity. If the door switch does not have continuity when activated, replace it.
Top Solution

05 - Doors not closing properly

Check to make sure all drawers and ice buckets are pushed in properly. Be sure the refrigerator doors are completely closed. There should be no visible gap around the door gasket.
Highly Likely

06 - Dacor Refrigerator Water Filter Housing

On many refrigerators, the incoming water will pass through a water filter before reaching the dispenser or the ice maker fill tube. If the water filter housing is damaged, water may not flow through the housing when the filter is installed. Inspect the water filter housing for damage and confirm it is properly seated. If necessary replace the damaged housing with a new one.
Common

Frequently Asked Questions

Fridge water dispenser not working — what should I check first?
Freezer cold but fridge warm and dispenser not working — could the door switch or control board be the problem?
Ice dispenser not working but water works — what parts should I inspect?
How do I test dispenser switches and the door switch with a multimeter?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?