Choose Product
Identify Problem
03
Find Solutions

Kelvinator Refrigerator ice and water dispenser not working

If your Kelvinator’s ice and water dispenser is not working, start with the parts that fail most often. Inspect the dispenser actuator first — a cracked or broken actuator won’t trip the switch to send power. If the whole dispenser is dead, the dispenser control board is the next likely culprit, but test individual parts before condemning the board. Use a multimeter to check the dispenser switches for continuity; a bad dispenser switch will stop water or ice delivery. Don’t forget the door switch, which disables the dispenser when the door is open, and make sure drawers and doors are fully closed and gasketed so the dispenser will operate. Finally, check the water filter housing and filter seating; a damaged or improperly seated filter housing can stop water flow. Whether your fridge water dispenser not working, refrigerator dispenser not dispensing water, or ice dispenser not working, these checks usually point you to the failed part. Enter your model number on RepairClinic.com to find the exact replacement part for your specific refrigerator.

01 - Kelvinator Refrigerator Dispenser Actuator

The dispenser actuator is the component that activates the switch or switches to send voltage to the dispenser. If the dispenser actuator is damaged, it may be unable to activate the switch. Inspect the dispenser actuator for any damage and replace with a new one if necessary.
Enter model number to search for the required part specific to your product
Top Solution

02 - Kelvinator Refrigerator Dispenser Control Board

The dispenser control board governs most of the functions of the dispenser system. If only one dispenser part is not working, it is probable that an individual part has failed. In this case, test each of the dispenser components before testing the control board. If the entire dispenser system is not working, the control board is more likely to be at fault.
Top Solution

03 - Kelvinator Refrigerator Dispenser Switch

The dispenser switches send voltage to the dispenser. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Top Solution

04 - Kelvinator Refrigerator Door Switch

The door switch turns off the ice and water dispenser when the refrigerator door is open. If the door switch fails, the dispenser will not turn on. To determine if the door switch is defective, use a multimeter to test it for continuity. If the door switch does not have continuity when activated, replace it.
Top Solution

05 - Doors not closing properly

Check to make sure all drawers and ice buckets are pushed in properly. Be sure the refrigerator doors are completely closed. There should be no visible gap around the door gasket.
Highly Likely

06 - Kelvinator Refrigerator Water Filter Housing

On many refrigerators, the incoming water will pass through a water filter before reaching the dispenser or the ice maker fill tube. If the water filter housing is damaged, water may not flow through the housing when the filter is installed. Inspect the water filter housing for damage and confirm it is properly seated. If necessary replace the damaged housing with a new one.
Common

Frequently Asked Questions

Refrigerator water dispenser not working — what should I check first?
Ice maker not making ice — could this be tied to the dispenser not working?
Refrigerator door not closing properly — will that affect the ice and water dispenser?
Refrigerator ice dispenser not working — how do I test the dispenser switch, actuator, and control board?
How do I enter my model number or part number on RepairClinic.com to find the right replacement part?

Shop by Kelvinator Refrigerator Parts