Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpE-Wave Refrigerator RepairE-Wave Refrigerator ice maker overflowing Repair
E-Wave Refrigerator ice maker overflowing
If your refrigerator ice maker is overflowing with water or ice, the most likely cause is a water inlet valve that will not shut off—either the house water pressure is below the valve's minimum (about 20 psi) or the valve is sticking or defective and leaking into the ice mold. Next check for an obstructed or jammed ice maker assembly; food or ice caught around the mechanism can stop the cycle and cause overflow. Low water pressure from the house supply is listed separately because it can prevent the inlet valve from closing even if the valve itself is fine. A failing ice maker assembly can also cause continual fill if internal components are bad, and a bad auger motor can lead to backup and overflow when ice cannot move through the dispenser. Finally, broken or missing mounting clips can let the ice maker sit unevenly and spill. You can test water flow at a nearby faucet, inspect and clear jams, spin the auger by hand and test motor continuity, and replace the inlet valve or ice maker assembly as needed. Enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator.
01 - E-Wave Refrigerator Water Inlet Valve
The water inlet valve requires a minimum of 20 psi to shut off properly. If the water pressure is too low, the valve may not close fully once the power is shut off. As a result, the valve will leak water into the ice maker and cause the ice maker to overflow. Check the water pressure to determine if it is at least 20 psi. If the water pressure is sufficient, the water inlet valve is likely defective. The valve may not shut off all the way or may be stuck open, causing water to leak through the valve. If the water pressure is sufficient, but the ice maker is still overflowing, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Obstructed Ice Maker
If there are food items stuck in or jammed around the ice maker, it may not cycle properly. The ice maker may get stuck in the middle of a cycle or overflow with ice or water. Inspect the ice maker and remove any items that may interfere with its operation.
Top Solution
03 - Low Water Pressure from House Supply
The water inlet valve, which supplies water to the refrigerator ice and water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the valve may not close fully when the power is shut off. As a result, the valve will leak water into the ice maker, causing it to overflow. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Top Solution
04 - E-Wave Refrigerator Ice Maker Assembly
One component of the ice maker assembly might be defective. Since many of the ice maker components are not sold separately, you may need to purchase and replace the entire ice maker assembly.
Highly Likely
05 - E-Wave Refrigerator Auger Motor
The auger motor spins the auger blade and pushes the ice through the dispenser chute. If the auger motor is burned out or defective, the ice won’t move forward and, potentially, the ice maker assembly can start to overflow. To determine if the auger motor is defective, pull out the ice bucket and turn the bucket auger by hand. If the auger turns freely, use a multimeter to test the auger motor for continuity. If the auger motor does not have continuity, or if the motor is getting power but won’t run, replace the auger motor.
Highly Likely
06 - E-Wave Refrigerator Clip
Some refrigerator ice makers are secured with clips. If one or more of the clips break, the ice maker may become dislodged and start to overflow. If the ice maker assembly is not sitting flush against the wall, purchase a new clip or clips to secure and seal.
Common
Frequently Asked Questions
Why is my ice maker overflowing with water or ice?
How do I test the water inlet valve and check if low water pressure is the cause?
My ice dispenser won’t move ice or the auger won’t turn. Could the auger motor be bad?
What should I check for if the ice maker is jammed or overflowing because parts are loose or broken?
How do I find and buy the correct replacement part on RepairClinic.com using my model number?
Shop by Popular E-Wave Refrigerator Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com