Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpDanby Refrigerator RepairDanby Refrigerator ice maker overflowing Repair
Danby Refrigerator ice maker overflowing
If your Danby refrigerator ice maker is overflowing with water or ice, start by checking the water inlet valve and the home water pressure—this valve needs at least 20 psi to shut off cleanly, and low pressure or a stuck/defective valve is the most common cause of an ice maker leaking water. Next, inspect the ice maker for jams or food stuck around the ejector that can stop cycles and cause overflow. If pressure and obstructions are not the issue, a faulty ice maker assembly is a likely suspect since many components are only available as the full assembly. Less commonly the auger motor or drive can fail and prevent ice from moving, leading to a backup, and broken mounting clips can let the ice maker sit improperly and overflow. Check water flow at the kitchen faucet, remove visible obstructions, manually spin the auger, and test motors with a multimeter if you have one. Enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator and get the parts and instructions you need.
01 - Danby Refrigerator Water Inlet Valve
The water inlet valve requires a minimum of 20 psi to shut off properly. If the water pressure is too low, the valve may not close fully once the power is shut off. As a result, the valve will leak water into the ice maker and cause the ice maker to overflow. Check the water pressure to determine if it is at least 20 psi. If the water pressure is sufficient, the water inlet valve is likely defective. The valve may not shut off all the way or may be stuck open, causing water to leak through the valve. If the water pressure is sufficient, but the ice maker is still overflowing, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Obstructed Ice Maker
If there are food items stuck in or jammed around the ice maker, it may not cycle properly. The ice maker may get stuck in the middle of a cycle or overflow with ice or water. Inspect the ice maker and remove any items that may interfere with its operation.
Top Solution
03 - Low Water Pressure from House Supply
The water inlet valve, which supplies water to the refrigerator ice and water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the valve may not close fully when the power is shut off. As a result, the valve will leak water into the ice maker, causing it to overflow. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Top Solution
04 - Danby Refrigerator Ice Maker Assembly
One component of the ice maker assembly might be defective. Since many of the ice maker components are not sold separately, you may need to purchase and replace the entire ice maker assembly.
Highly Likely
05 - Danby Refrigerator Auger Motor
The auger motor spins the auger blade and pushes the ice through the dispenser chute. If the auger motor is burned out or defective, the ice won’t move forward and, potentially, the ice maker assembly can start to overflow. To determine if the auger motor is defective, pull out the ice bucket and turn the bucket auger by hand. If the auger turns freely, use a multimeter to test the auger motor for continuity. If the auger motor does not have continuity, or if the motor is getting power but won’t run, replace the auger motor.
Highly Likely
06 - Danby Refrigerator Clip
Some refrigerator ice makers are secured with clips. If one or more of the clips break, the ice maker may become dislodged and start to overflow. If the ice maker assembly is not sitting flush against the wall, purchase a new clip or clips to secure and seal.
Common
Frequently Asked Questions
Why is my Danby refrigerator ice maker overflowing with water?
My ice maker keeps overflowing with ice or water. Could something be jammed?
Ice won't dispense and the ice maker is overflowing — could the auger motor be the problem?
Do I have to replace the whole ice maker assembly if one part fails?
How do I find and order the right replacement part for my Danby refrigerator on RepairClinic.com?
Shop by Danby Refrigerator Parts
Shop by Popular Danby Refrigerator Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com