Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpHotpoint Refrigerator RepairHotpoint Refrigerator ice maker overflowing Repair
Hotpoint Refrigerator ice maker overflowing
If your refrigerator ice maker is overflowing, start with the water inlet valve. The valve requires at least 20 psi to shut off properly, so low house water pressure or a valve that is stuck open will allow water to keep filling the ice mold. Next check for an obstructed ice maker, where food or jammed ice can stop the cycle and cause overflow. Low water pressure from the supply line itself can also cause the valve to fail to close, so test flow at a nearby faucet. If those checks don’t fix it, an internal ice maker component may be defective and many models require replacing the entire ice maker assembly. A failed auger motor can back up ice in the dispenser and contribute to overflow, and broken mounting clips can let the assembly sit out of alignment. Test the valve and motor with a multimeter or remove visible obstructions, and enter your model number on RepairClinic.com to find the exact replacement water inlet valve, ice maker assembly, auger motor, or clips for your refrigerator.
01 - Hotpoint Refrigerator Water Inlet Valve
The water inlet valve requires a minimum of 20 psi to shut off properly. If the water pressure is too low, the valve may not close fully once the power is shut off. As a result, the valve will leak water into the ice maker and cause the ice maker to overflow. Check the water pressure to determine if it is at least 20 psi. If the water pressure is sufficient, the water inlet valve is likely defective. The valve may not shut off all the way or may be stuck open, causing water to leak through the valve. If the water pressure is sufficient, but the ice maker is still overflowing, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Obstructed Ice Maker
If there are food items stuck in or jammed around the ice maker, it may not cycle properly. The ice maker may get stuck in the middle of a cycle or overflow with ice or water. Inspect the ice maker and remove any items that may interfere with its operation.
Top Solution
03 - Low Water Pressure from House Supply
The water inlet valve, which supplies water to the refrigerator ice and water dispenser, requires sufficient water pressure to work properly. If the water pressure is too low, the valve may not close fully when the power is shut off. As a result, the valve will leak water into the ice maker, causing it to overflow. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Top Solution
04 - Hotpoint Refrigerator Ice Maker Assembly
One component of the ice maker assembly might be defective. Since many of the ice maker components are not sold separately, you may need to purchase and replace the entire ice maker assembly.
Highly Likely
05 - Hotpoint Refrigerator Auger Motor
The auger motor spins the auger blade and pushes the ice through the dispenser chute. If the auger motor is burned out or defective, the ice won’t move forward and, potentially, the ice maker assembly can start to overflow. To determine if the auger motor is defective, pull out the ice bucket and turn the bucket auger by hand. If the auger turns freely, use a multimeter to test the auger motor for continuity. If the auger motor does not have continuity, or if the motor is getting power but won’t run, replace the auger motor.
Highly Likely
06 - Hotpoint Refrigerator Clip
Some refrigerator ice makers are secured with clips. If one or more of the clips break, the ice maker may become dislodged and start to overflow. If the ice maker assembly is not sitting flush against the wall, purchase a new clip or clips to secure and seal.
Common
Frequently Asked Questions
Why is my Hotpoint ice maker overflowing with water or ice?
My ice maker is not making ice. What should I check first?
How do I test the auger motor when the ice dispenser won’t move ice?
Can low water pressure cause the ice maker to overflow?
How do I enter my model number or part number at RepairClinic.com to find the right replacement?
Shop by Hotpoint Refrigerator Parts
Shop by Popular Hotpoint Refrigerator Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com