Choose Product
Identify Problem
03
Find Solutions

Sears Vacuum cleaner won't pick up, no suction

01 - Sears Vacuum Cleaner Air Filter

The air filter traps particles as the air travels through the vacuum cleaner. If the filter is clogged, the vacuum cleaner will not have proper suction. If your vacuum filter is clogged, refer to your owner’s manual for cleaning instructions.
Enter model number to search for the required part specific to your product
Top Solution

02 - Sears Vacuum Cleaner Exhaust Filter

The exhaust filter traps particles as the air travels through the vacuum cleaner. If the filter is clogged, the vacuum cleaner will not have proper suction. If your vacuum filter is clogged, refer to your owner’s manual for cleaning instructions.
Top Solution

03 - Sears Vacuum Cleaner Vacuum Hose

Remove the hose from the vacuum cleaner, stretch out the hose so that it is straight, shine a bright flashlight into one end of the hose, and look through the opposite end of the hose. If the flashlight beam is not visible from the other end of the vacuum hose, this indicates that the vacuum hose is clogged or obstructed.
Top Solution

04 - Sears Vacuum Cleaner Vacuum Bag

The vacuum bag might be full. Clean or replace the bag as recommended by the manufacturer.
Top Solution

05 - Sears Vacuum Cleaner Blower Wheel

Try turning the blower wheel by hand. If the blower wheel does not turn freely, check the wheel for obstructions. If no obstructions are present, the blower motor, not the blower wheel, is likely at fault.
Uncommon But Possible