Choose Product
Identify Problem
03
Find Solutions

Gaggenau Washer clothes still wet at the end of cycle

When your Gaggenau washer leaves clothes wet at the end of the cycle, the inner tub may not be spinning fast enough to remove water. A worn clutch is the most likely cause, especially in some top load models. Next, inspect the drive belt for signs that it is broken, loose, or slipping on the pulleys. A worn clutch band kit can cause the same washer clothes still wet symptom. If those parts are in good condition, check the basket drive for stripped spin tube tabs, a damaged drive block, or worn clutch pads. The hub may also have stripped teeth and fail to engage the inner tub. Finally, a defective motor control board may not send power to the motor, leaving the washer not spinning out water. These problems can cause washing machine clothes still wet, washer clothes soaking wet, or washer clothes wet at end of cycle. Enter your model number to find the exact replacement clutch, belt, clutch band kit, basket drive, hub, or motor control board for your specific Gaggenau washing machine.

01 - Gaggenau Washing Machine Clutch

Some top load washers use a clutch to spin the inner tub. If the clutch gets worn the clothes may come out wet.
Enter model number to search for the required part specific to your product
Highly Likely

02 - Gaggenau Washing Machine Drive Belt

Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it.
Highly Likely

03 - Gaggenau Washing Machine Clutch Band Kit

Some top load washers use a clutch to spin the inner tub. If the clutch gets worn the clothes may come out wet. You can fix the problem you can install a new clutch band kit, if applicable to the model.
Common

04 - Gaggenau Washing Machine Basket Drive

The basket drive sits on top of the transmission and engages with the inner tub. If the transmission is engaging to spin, and the outer tub spins slowly or does not spin at all, the spin tube tabs may be stripped. Alternatively, the drive block on the spin tube may be stripped. Inspect both the spin tube tabs and the drive block. If the spin tube tabs and drive block are not worn out, the clutch pads on the basket drive are likely worn out. If the clutch pads are worn out, you must replace the basket drive.
Common

05 - Gaggenau Washing Machine Hub

The hub is seated on top of the transmission and engages with the inner tub. If the transmission is engaged to spin, and the outer tub spins slowly or does not spin at all, the hub teeth may be stripped. Inspect the hub for damage or wear and replace if necessary.
Common

06 - Gaggenau Washing Machine Motor Control Board

The motor control board provides power to the motor. If the motor control board is defective, the washer may not function properly or may not work at all. First, check the control board for burned out components. To determine if the motor control board is defective, ensure that the control board is providing power to the motor. If the control board has power, but is not providing power to the motor, replace it.
Common

Frequently Asked Questions

Why are my Gaggenau washer clothes still wet at the end of the cycle?
Why is my Gaggenau washer not spinning out the water?
How do I know if the washer clutch or clutch band kit is bad?
Could the Gaggenau washer motor control board cause clothes to stay wet?
How do I find the correct Gaggenau washer part for a wet-clothes or no-spin problem?

Shop by Gaggenau Washing Machine Parts